Sauder 414129 Assembly Instruction Manual

sauder.com

Twin Platform Bed

with Headboard

Parklane Collection | Model 414129

NOTE: THIS INSTRUCTION

BOOKLET CONTAINS IMPORTANT

SAFETY INFORMATION.

PLEASE READ AND KEEP FOR

FUTURE REFERENCE.

English pg 1-20

Français pg 21-23

Español pg 24-26

Lot # 530074 05/28/19

Purchased: __________________

sauder.com

CONTACT US FIRST

BEFORE MAKING ANY RETURNS TO THE STORE.

Share your journey!

sauder.com

CONTACT US FIRST

BEFORE MAKING ANY RETURNS TO THE STORE.

Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.

Prefer the phone? Give us a ring at

1-800-523-3987.

Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)

WARNING

CHOKING HAZARD - Small Parts

Not for children under 3 years.

Adult assembly required.

Table of Contents Assembly Tools Required

3

4

5-20

21-23

24-26

27

Part Identiﬁ cation

Hardware Identiﬁ cation

Assembly Steps

Français

Español

Warranty

No. 2 Phillips Screwdriver

Tip Shown Actual Size

Skip the power trip.

This time.

414129 www.sauder.com/servicePage 2

Part Identiﬁ cation

å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge

to help distinguish similar parts from each other. Use this part identiﬁ cation to help identify similar parts.

A3 RIGHT END (1)

B3 LEFT END (1)

E3 HEADBOARD TOP (1)

I3 SLAT (2)

N2 LEFT FOOTBOARD RAIL (1)

O2 RIGHT FOOTBOARD RAIL (1)

Q SUPPORT (4)

R FOOTBOARD (1)

S HEADBOARD (1)

T LEFT HEADBOARD RAIL (1)

U RIGHT HEADBOARD RAIL (1)

V LEFT/RIGHT BACK (2)

W PLATFORM (3)

X SMALL SUPPORT (4)

Y LARGE SUPPORT (2)

Z CENTER BACK (1)

Now you know

our ABCs.

414129www.sauder.com/service

Page 3

A3

B3

X

Y

E3

Z

U

Q

W

R

S

T

N2

V

W

I3

Y

Q

X

O2

X

Hardware Identiﬁ cation

å Screws are shown actual size. You may receive extra hardware with your unit.

414129 www.sauder.com/servicePage 4

Z-PLATE - 2

75G

FELT DISC CARD - 2

1M

HIDDEN CAM - 4

1F

WOOD DOWEL - 2

15F

BI-CAM DOWEL - 2

25F

METAL PIN - 8

1R

BLACK 9/16" LARGE HEAD SCREW - 36

1S 12S

BROWN 1" FLAT HEAD SCREW - 52

BLACK 1-1/2" FLAT HEAD SCREW - 16

101S

BLACK 1-15/16" FLAT HEAD SCREW - 20

113S

Step 1

Look for this icon. It means a

video assembly tip is available at

www.sauder.com/service/tips

å

Assemble your unit on a carpeted ﬂ oor or on the empty carton

to avoid scratching your unit or the ﬂ oor.

å

Push four HIDDEN CAMS (1F) into the RAILS (N2, O2, T, and U).

414129www.sauder.com/service

Page 5

U

T

N2

O2

Arrow

1F

Arrow

The arrow in the HIDDEN

CAM must point toward the

hole in the edge of the board.

Hole

Step 2

å

Fasten two of the SMALL SUPPORTS (X) to the

FOOTBOARD RAILS (N2 and O2). Use twelve

BROWN 1" FLAT HEAD SCREWS (12S).

å

NOTE: Start each SCREW a few turns before

tightening any of them.

414129 www.sauder.com/servicePage 6

N2

O2

X

The HIDDEN CAM

must be here.

These holes

must be here.

These holes

must be here.

Finished edge

BROWN 1" FLAT HEAD SCREW

(12 used in this step)

12S

Surface with

HIDDEN CAM

Surface with

HIDDEN CAM

Some assembly

(and snacks) required.

å

Fasten the SUPPORTS (Q) to the LARGE SUPPORTS (Y),

FOOTBOARD (R), and HEADBOARD (S). Use twenty

BROWN 1" FLAT HEAD SCREWS (12S).

å

NOTE: Use the center two holes in the SUPPORTS (Q) that

will be fastened to the LARGE SUPPORTS (Y).

å

NOTE: Start each SCREW a few turns before tightening

any of them.

Step 3

414129www.sauder.com/service

Page 7

Y

R

S

Y

Q

BROWN 1" FLAT HEAD SCREW

(20 used in this step)

12S

Surface with more holes

Unﬁ nished edge

Step 4

å

Fasten the HEADBOARD RAILS (T and U) to the ENDS (A3

and B3). Use eight BROWN 1" FLAT HEAD SCREWS (12S).

å

NOTE: Start each SCREW a few turns before tightening any

of them.

414129 www.sauder.com/servicePage 8

A3

B3

U

T

Surface with

HIDDEN CAM

Surface with

HIDDEN CAM

The HIDDEN CAM

must be here.

The HIDDEN CAM

must be here.

Curved edge

Surface with more holes

Curved edge

BROWN 1" FLAT HEAD SCREW

(8 used in this step)

12S

å

Fasten the remaining two SMALL SUPPORTS (X) to the

HEADBOARD RAILS (T and U). Use twelve BROWN 1"

FLAT HEAD SCREWS (12S).

å

NOTE: Start each SCREW a few turns before tightening

any of them.

Step 5

414129www.sauder.com/service

Page 9

U

T

X

BROWN 1" FLAT HEAD SCREW

(12 used in this step)

12S

These holes

must be here.

These holes

must be here.

Step 6

å

Peel the FELT DISCS from the FELT DISC CARDS (1M)

and stick them onto the edges of the ENDS (A3 and B3),

LARGE SUPPORTS (Y), and FOOTBOARD (R) as shown.

414129 www.sauder.com/servicePage 10

Y

R

Y

A3

B3

1M

Long ﬁ nished edge

å

Fasten the FOOTBOARD (R) to the FOOTBOARD

RAILS (N2 and O2). Use four BLACK 1-15/16" FLAT

HEAD SCREWS (113S).

å

NOTE: Start each SCREW a few turns before

tightening any of them.

Step 7

414129www.sauder.com/service

Page 11

N2

O2

X

R

Q

Finished edge

Long ﬁ nished edge

BLACK 1-15/16" FLAT HEAD SCREW

(4 used in this step)

113S

Step 8

å

NOTE: You will need to hold the SUPPORT (Q) o the ground or

place packing material under the SUPPORT while fastening it to

the SMALL SUPPORTS (X).

å

Fasten one of the SUPPORTS (Q) with LARGE SUPPORT (Y) to the

SMALL SUPPORTS (X) on the FOOTBOARD RAILS (N2 and O2).

Use four BLACK 1-15/16" FLAT HEAD SCREWS (113S).

å

NOTE: The LARGE SUPPORT (Y) should be o the ground and

facing toward the FOOTBOARD (R).

414129 www.sauder.com/servicePage 12

Don't worry. It isn't

Rome. This can be built

in a day.

Y

N2

O2

X

Q

R

BLACK 1-15/16" FLAT HEAD SCREW

(4 used in this step)

113S

å

NOTE: Do not apply any pressure to the SUPPORT (Q) or

HEADBOARD (S) once they are fastened in this step.

å

Fasten the remaining SUPPORT (Q) with LARGE SUPPORT (Y)

to the SMALL SUPPORT (X) on the LEFT HEADBOARD RAIL (T).

Use two BLACK 1-15/16" FLAT HEAD SCREWS (113S).

å

NOTE: The LARGE SUPPORT (Y) should be facing toward

the HEADBOARD (S).

å

Fasten the HEADBOARD (S) to the LEFT HEADBOARD RAIL (T).

Use two BLACK 1-15/16" FLAT HEAD SCREWS (113S).

Step 9

414129www.sauder.com/service

Page 13

BLACK 1-15/16" FLAT HEAD SCREW

(4 used in this step)

113S

S

Q

Y

Q

Finished edge

with holes

T

X

The LARGE SUPPORT (Y)

should be here.

B3

Step 10

å

NOTE: You may need someone's help in this step.

å

Fasten the HEADBOARD (S) to the RIGHT HEADBOARD RAIL (U).

Use two BLACK 1-15/16" FLAT HEAD SCREWS (113S).

å

Fasten the SUPPORT (Q) to the SMALL SUPPORT (X) on the

RIGHT HEADBOARD RAIL (U). Use two BLACK 1-15/16" FLAT

HEAD SCREWS (113S).

414129 www.sauder.com/servicePage 14

A3

U

Q

BLACK 1-15/16" FLAT HEAD SCREW

(4 used in this step)

113S

X

B3

S

å

With someone's help, carefully turn the FOOTBOARD (R) assembly and the

HEADBOARD (S) assembly onto their bottom edges.

å

Insert two BI-CAM DOWELS (25F) into the HEADBOARD RAILS (T and U). Tighten

two HIDDEN CAMS.

å

Insert two WOOD DOWELS (15F) into the HEADBOARD RAILS (T and U).

å

Fasten the FOOTBOARD RAILS (N2 and O2) to the HEADBOARD RAILS (T and U).

Tighten two HIDDEN CAMS.

å

NOTE: Be sure the WOOD DOWELS in the HEADBOARD RAILS insert into the

FOOTBOARD RAILS.

Step 11

414129www.sauder.com/service

Page 15

U

T

N2

O2

15F

25F

15F

25F

1

2

R

S

Step 12

å

Fasten the Z-PLATES (75G) to the RAILS (N2, O2, T, and U).

Use eight BLACK 9/16" LARGE HEAD SCREWS (1S).

å

NOTE: The Z-PLATES will wrap around the bottom edges of

the RAILS (N2, O2, T, and U).

414129 www.sauder.com/servicePage 16

U

T

N2

O2

BLACK 9/16" LARGE HEAD SCREW

(8 used in this step)

1S

75G

å

Insert four METAL PINS (1R) into the holes in the top

edge of the HEADBOARD (S).

å

Place the SLATS (I3) onto the METAL PINS (1R) in

the HEADBOARD (S).

å

Insert four METAL PINS (1R) into the holes in the top

edges of the SLATS (I3).

Step 13

414129www.sauder.com/service

Page 17

S

I3

Finished surface

1R

Step 14

å

Fasten the HEADBOARD TOP (E3) to the ENDS (A3 and B3).

Use four BLACK 1-15/16" FLAT HEAD SCREWS (113S).

å

NOTE: Be sure the METAL PINS in the SLATS (I3) insert into

the HEADBOARD TOP.

414129 www.sauder.com/servicePage 18

I3

A3

B3 E3

BLACK 1-15/16" FLAT HEAD SCREW

(4 used in this step)

113S

Finished surface

113S

Edge without holes

å

NOTE: Position the BACKS (V) exactly as shown.

å

Fasten the BACKS (V and Z) to the ENDS (A3 and B3),

HEADBOARD TOP (E3), SLATS (I3), and HEADBOARD (S). Use

twenty-eight BLACK 9/16" LARGE HEAD SCREWS (1S).

å

NOTE: The outside edges of the BACKS (V) will be fastened last.

å

NOTE: There are no pre-drilled holes in the edges of the ENDS (A3

and B3). Use ﬁ rm pressure when fastening the outside edges of the

BACKS (V) to the ENDS (A3 and B3).

Step 15

414129www.sauder.com/service

Page 19

A tracking label will be on this

surface of one of the BACKS (V).

Please do not remove.

If you're doing this to

help a friend, don't

leave without a bite.

A3

B3

E3

Z

S

BLACK 9/16" LARGE HEAD SCREW

(28 used in this step)

1S

Unﬁ nished

surface

V

Unﬁ nished

surface

V

Unﬁ nished

surface

I3

NOTE: Fasten the outside edges

of the BACKS (V) last using ﬁ rm

pressure. The two smaller holes in

the edges of the BACKS (V) must

line up over the ENDS (A3 and B3).

Step 16

å

NOTE: Position the PLATFORMS (W) exactly as shown.

å

Fasten the PLATFORMS (W) to the SUPPORTS (Q, X, and Y). Use sixteen BLACK 1-1/2" FLAT HEAD SCREWS (101S) into

the exact holes shown.

å

This completes assembly. Clean with a damp cloth. Wipe dry.

414129 www.sauder.com/servicePage 20

BLACK 1-1/2" FLAT HEAD SCREW

(16 used in this step)

101S

W

These holes are

closer together

and must be here.

These holes are

closer together

and must be here.

NOTE: Do not

put SCREWS into

these two holes.

Y

Q

X

And to celebrate, why not share your success story at Walmart.com or

Page is loading ...

Sauder 414129 Assembly Instruction Manual

Sauder 414129 Assembly Instruction Manual

in other languages

Related papers

Other documents