HOLDUP DEVICES (SHOWN IN NORMAL UNACTUATED CONDITION)
DESCRIPTION
The model HUR-S is a foot operated holdup switch. The
unit is self locking and has a visual indication to show if
unit is operated. A key switch is required to reset the
device after it has been operated.
DPDT contacts are provided, so that the device may be
used on open or closed circuit alarm systems, and also to
operate annunciators, remote lamps, cameras, etc., at
the same time
Stock No. 2020019
UL Listed
Dimensions: 11 1/2"W x 5 1/4"H x 3 1/4"D
29,2 cm W x 13,3 cm H x 8,26 cm D
Weight: 3.25 lbs. (1,46 kg.)
Enclosure: Aluminum with gray spatter enamel finish
Switch Rating: DPDT Switch
1.75 Amps at 24VAC, 1.50 Amps at
28VDC 0.23 Amp at 115VAC, 0.10 Amp
at 130VDC
PRINTED IN USA PAGE 1 OF 1MKT. #8870006 - REV E
MFG. #5400588 - 12/01
Potter Electric Signal Company • 2081 Craig Road, St. Louis, MO, 63146-4161 • Phone: 800-325-3936/Canada 888-882-1833 • www.pottersignal.com
HUR-S
HOLD-UP RAIL
firealarmresources.com
/
