Ruckus Wireless Ruckus ICX 7150 Series Hardware Installation Manual

HARDWARE INSTALLATION GUIDE

Ruckus ICX 7150 Switch

Hardware Installation Guide

53-1004928-02

13 March 2017

©

Brocade, the B-wing symbol, and MyBrocade are registered trademarks of Brocade Communications Systems, Inc., in the United States and in other

countries. Other brands, product names, or service names mentioned of Brocade Communications Systems, Inc. are listed at www.brocade.com/en/legal/

brocade-Legal-intellectual-property/brocade-legal-trademarks.html. Other marks may belong to third parties.

Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment,

equipment feature, or service oered or to be oered by Brocade. Brocade reserves the right to make changes to this document at any time, without

notice, and assumes no responsibility for its use. This informational document describes features that may not be currently available. Contact a Brocade

sales oce for information on feature and product availability. Export of technical data contained in this document may require an export license from the

United States government.

The authors and Brocade Communications Systems, Inc. assume no liability or responsibility to any person or entity with respect to the accuracy of this

document or any loss, cost, liability, or damages arising from the information contained herein or the computer programs that accompany it.

The product described by this document may contain open source software covered by the GNU General Public License or other open source license

agreements. To nd out which open source software is included in Brocade products, view the licensing terms applicable to the open source software, and

obtain a copy of the programming source code, please visit http://www.brocade.com/support/oscd.

Ruckus ICX 7150 Switch Hardware Installation Guide

2 53-1004928-02

Contents

Preface...................................................................................................................................................................................................................................7

Document conventions............................................................................................................................................................................................................................7

Notes, cautions, and warnings.....................................................................................................................................................................................................7

Text formatting conventions.........................................................................................................................................................................................................7

Command syntax conventions....................................................................................................................................................................................................8

Brocade resources.....................................................................................................................................................................................................................................8

Document feedback..................................................................................................................................................................................................................................8

Contacting Brocade Technical Support............................................................................................................................................................................................ 9

Brocade customers..........................................................................................................................................................................................................................9

Brocade OEM customers............................................................................................................................................................................................................. 9

About This Document..................................................................................................................................................................................................... 11

Supported hardware and software................................................................................................................................................................................................... 11

What's new in this document............................................................................................................................................................................................................. 12

Device Overview............................................................................................................................................................................................................... 13

Hardware features...................................................................................................................................................................................................................................13

License options........................................................................................................................................................................................................................................14

Port-side view...........................................................................................................................................................................................................................................15

Nonport-side view..................................................................................................................................................................................................................................16

Device management options.............................................................................................................................................................................................................17

Preparing for the Installation..........................................................................................................................................................................................19

Safety precautions.................................................................................................................................................................................................................................. 19

General precautions......................................................................................................................................................................................................................19

ESD precautions............................................................................................................................................................................................................................ 20

Power precautions.........................................................................................................................................................................................................................20

Lifting and weight-related precautions................................................................................................................................................................................. 20

Laser precautions.......................................................................................................................................................................................................................... 21

Facility requirements..............................................................................................................................................................................................................................21

Quick installation checklist.................................................................................................................................................................................................................. 22

Pre-installation tasks.................................................................................................................................................................................................................... 22

Installation and initial conguration.........................................................................................................................................................................................23

Shipping carton contents.....................................................................................................................................................................................................................24

Mounting the Device........................................................................................................................................................................................................25

Mounting options....................................................................................................................................................................................................................................25

Precautions specic to mounting.....................................................................................................................................................................................................25

Mounting on a desktop or at surface............................................................................................................................................................................................26

Mounting the compact device with a magnet.............................................................................................................................................................................28

Attaching the magnet sheet to the device...........................................................................................................................................................................29

Mounting the device on a metal surface or metal wall...................................................................................................................................................30

Mounting the device under a metal desk.............................................................................................................................................................................32

Mounting the compact device under a xed surface...............................................................................................................................................................34

Mounting the compact device directly on a wall........................................................................................................................................................................37

Mounting on a wall using the wall mount brackets................................................................................................................................................................... 41

Mounting on a two-post rack.............................................................................................................................................................................................................46

Installing the 1U, 1.5U, and 2U Universal Kit for Four Post Racks (XBR-R000295)..............................................................................................51

Ruckus ICX 7150 Switch Hardware Installation Guide

53-1004928-02 3

Time and items required...................................................................................................................................................................................................................... 52

Parts list.......................................................................................................................................................................................................................................................52

Flush-front mounting the device in the rack................................................................................................................................................................................53

Attaching the front brackets.......................................................................................................................................................................................................54

Attaching the extension brackets to the device.................................................................................................................................................................55

Installing the device in the rack................................................................................................................................................................................................ 56

Attaching the rear brackets to the extensions.................................................................................................................................................................... 57

Attaching the rear brackets to the rack posts.....................................................................................................................................................................59

Flush-rear (recessed) mounting the device in the rack............................................................................................................................................................60

Attaching the front brackets to the rear of the device.....................................................................................................................................................60

Attaching the extensions to the front of the device..........................................................................................................................................................61

Installing the device in the rack................................................................................................................................................................................................ 62

Attaching the rear brackets to the extensions at the front of the device................................................................................................................. 63

Attaching the rear brackets to the front rack posts.......................................................................................................................................................... 65

Initial Setup and Verication.......................................................................................................................................................................................... 67

Items required...........................................................................................................................................................................................................................................67

Providing power to the device........................................................................................................................................................................................................... 67

Establishing a rst-time connection to the console port........................................................................................................................................................68

Recovering from a lost password............................................................................................................................................................................................70

Conguring an IP address for the device......................................................................................................................................................................................71

Customizing the host name and chassis name ........................................................................................................................................................................71

Setting the date and time.....................................................................................................................................................................................................................72

Establishing a connection to the out-of-band management port......................................................................................................................................72

Getting in-band access.........................................................................................................................................................................................................................73

Verifying the correct operation...........................................................................................................................................................................................................73

Backing up the running conguration............................................................................................................................................................................................ 73

Installing Transceivers and Cables................................................................................................................................................................................75

Time and items required...................................................................................................................................................................................................................... 75

Precautions specic to transceivers and cables.........................................................................................................................................................................75

Managing cables..................................................................................................................................................................................................................................... 76

Installing the Ethernet RJ-45 cables...............................................................................................................................................................................................76

Cleaning the ber-optic connectors................................................................................................................................................................................................78

Installing a new ber-optic transceiver...........................................................................................................................................................................................78

Cabling a ber-optic transceiver.......................................................................................................................................................................................................79

Replacing a ber-optic transceiver.................................................................................................................................................................................................. 80

Monitoring the Device..................................................................................................................................................................................................... 83

Interpreting port-side LEDs................................................................................................................................................................................................................83

System LEDs.................................................................................................................................................................................................................................. 85

RJ-45 Ethernet port status LED in default mode........................................................................................................................................................... 87

SFP+ port status LED default mode.....................................................................................................................................................................................88

Interpreting nonport-side LEDs........................................................................................................................................................................................................88

Pinging an IP address........................................................................................................................................................................................................................... 89

Tracing a route..........................................................................................................................................................................................................................................89

Digital optical monitoring.....................................................................................................................................................................................................................89

Monitoring power and cooling...........................................................................................................................................................................................................89

Ruckus ICX 7150 Switch Technical Specications.................................................................................................................................................. 91

System specications............................................................................................................................................................................................................................91

Ethernet.......................................................................................................................................................................................................................................................91

Ruckus ICX 7150 Switch Hardware Installation Guide

4 53-1004928-02

LEDs.............................................................................................................................................................................................................................................................92

Other............................................................................................................................................................................................................................................................ 92

Weight and physical dimensions...................................................................................................................................................................................................... 93

Environmental requirements.............................................................................................................................................................................................................. 93

Power supply specications (per PSU)..........................................................................................................................................................................................94

Power consumption (idle conguration)........................................................................................................................................................................................ 95

Power consumption (typical conguration).................................................................................................................................................................................. 95

Power consumption (maximum conguration)...........................................................................................................................................................................96

Data port specications (Ethernet)...................................................................................................................................................................................................97

Serial port specications (pinout RJ-45).......................................................................................................................................................................................98

Serial port specications (protocol)..................................................................................................................................................................................................98

Memory specications..........................................................................................................................................................................................................................98

Regulatory compliance (EMC)...........................................................................................................................................................................................................98

Regulatory compliance (safety)..........................................................................................................................................................................................................99

Regulatory compliance (environmental).........................................................................................................................................................................................99

Regulatory Statements.................................................................................................................................................................................................101

CE statement.........................................................................................................................................................................................................................................101

China ROHS.......................................................................................................................................................................................................................................... 101

BSMI statement (Taiwan)..................................................................................................................................................................................................................101

Canadian requirements......................................................................................................................................................................................................................102

China CCC statement.........................................................................................................................................................................................................................102

Europe and Australia (CISPR 32 Class A Warning)...............................................................................................................................................................103

FCC warning (US only)...................................................................................................................................................................................................................... 103

Germany statement.............................................................................................................................................................................................................................103

KCC statement (Republic of Korea).............................................................................................................................................................................................. 103

VCCI statement.....................................................................................................................................................................................................................................103

Cautions and Danger Notices..................................................................................................................................................................................... 105

Cautions...................................................................................................................................................................................................................................................105

General cautions......................................................................................................................................................................................................................... 105

Electrical cautions.......................................................................................................................................................................................................................107

Danger Notices.....................................................................................................................................................................................................................................108

General dangers..........................................................................................................................................................................................................................109

Electrical dangers........................................................................................................................................................................................................................109

Dangers related to equipment weight................................................................................................................................................................................111

Laser dangers.............................................................................................................................................................................................................................. 112

Ruckus ICX 7150 Switch Hardware Installation Guide

53-1004928-02 5

Ruckus ICX 7150 Switch Hardware Installation Guide

6 53-1004928-02

Preface

• Document conventions......................................................................................................................................................................................7

• Brocade resources............................................................................................................................................................................................... 8

• Document feedback............................................................................................................................................................................................8

• Contacting Brocade Technical Support.......................................................................................................................................................9

Document conventions

The document conventions describe text formatting conventions, command syntax conventions, and important notice formats used in

Brocade technical documentation.

Notes, cautions, and warnings

Notes, cautions, and warning statements may be used in this document. They are listed in the order of increasing severity of potential

hazards.

NOTE

A Note provides a tip, guidance, or advice, emphasizes important information, or provides a reference to related information.

ATTENTION

An Attention statement indicates a stronger note, for example, to alert you when trac might be interrupted or the device might

reboot.

CAUTION

A Caution statement alerts you to situations that can be potentially hazardous to you or cause damage to hardware,

rmware, software, or data.

DANGER

A Danger statement indicates conditions or situations that can be potentially lethal or extremely hazardous to you. Safety

labels are also attached directly to products to warn of these conditions or situations.

Text formatting conventions

Text formatting conventions such as boldface, italic, or Courier font may be used to highlight specic words or phrases.

Format Description

bold text Identies command names.

Identies keywords and operands.

Identies the names of GUI elements.

Identies text to enter in the GUI.

italic text Identies emphasis.

Identies variables.

Identies document titles.

Courier font

Identies CLI output.

Ruckus ICX 7150 Switch Hardware Installation Guide

53-1004928-02 7

Format Description

Identies command syntax examples.

Command syntax conventions

Bold and italic text identify command syntax components. Delimiters and operators

dene groupings of parameters and their logical

relationships.

Convention Description

bold text Identies command names, keywords, and command options.

italic text Identies a variable.

value In Fibre Channel products, a xed value provided as input to a command option is printed in plain text, for

example, --show WWN.

[ ] Syntax components displayed within square brackets are optional.

Default responses to system prompts are enclosed in square brackets.

{ x | y | z } A choice of required parameters is enclosed in curly brackets separated by vertical bars. You must select

one of the options.

In Fibre Channel products, square brackets may be used instead for this purpose.

x | y A vertical bar separates mutually exclusive elements.

< > Nonprinting characters, for example, passwords, are enclosed in angle brackets.

... Repeat the previous element, for example, member[member...].

\ Indicates a “soft” line break in command examples. If a backslash separates two lines of a command

input, enter the entire command at the prompt without the backslash.

Brocade resources

Visit the Brocade website to locate related documentation for your product and additional Brocade resources.

White papers, data sheets, and the most recent versions of Brocade software and hardware manuals are available at www.brocade.com.

Product documentation for all supported releases is available to registered users at MyBrocade.

Click the Support tab and select Document Library to access product documentation on MyBrocade or www.brocade.com. You can

locate documentation by product or by operating system.

Release notes are bundled with software downloads on MyBrocade. Links to software downloads are available on the MyBrocade landing

page and in the Document Library.

Document feedback

Quality is our

rst concern at Brocade, and we have made every eort to ensure the accuracy and completeness of this document.

However, if you nd an error or an omission, or you think that a topic needs further development, we want to hear from you. You can

provide feedback in two ways:

• Through the online feedback form in the HTML documents posted on www.brocade.com

• By sending your feedback to documentation@brocade.com

Provide the publication title, part number, and as much detail as possible, including the topic heading and page number if applicable, as

well as your suggestions for improvement.

Brocade resources

Ruckus ICX 7150 Switch Hardware Installation Guide

8 53-1004928-02

Contacting Brocade Technical Support

As a Brocade customer, you can contact Brocade Technical Support 24x7 online or by telephone. Brocade OEM customers should

contact their OEM/solution provider.

Brocade customers

For product support information and the latest information on contacting the Technical Assistance Center, go to www.brocade.com and

select Support.

If you have purchased Brocade product support directly from Brocade, use one of the following methods to contact the Brocade

Technical Assistance Center 24x7.

Online Telephone

Preferred method of contact for non-urgent issues:

• Case management through the MyBrocade portal.

• Quick Access links to Knowledge Base, Community, Document

Library, Software Downloads and Licensing tools

Required for Sev 1-Critical and Sev 2-High issues:

• Continental US: 1-800-752-8061

• Europe, Middle East, Africa, and Asia Pacic: +800-AT FIBREE

(+800 28 34 27 33)

• Toll-free numbers are available in many countries.

• For areas unable to access a toll-free number:

+1-408-333-6061

Brocade OEM customers

If you have purchased Brocade product support from a Brocade OEM/solution provider, contact your OEM/solution provider for all of

your product support needs.

• OEM/solution providers are trained and

certied by Brocade to support Brocade

®

products.

• Brocade provides backline support for issues that cannot be resolved by the OEM/solution provider.

• Brocade Supplemental Support augments your existing OEM support contract, providing direct access to Brocade expertise.

For more information, contact Brocade or your OEM.

• For questions regarding service levels and response times, contact your OEM/solution provider.

Contacting Brocade Technical Support

Ruckus ICX 7150 Switch Hardware Installation Guide

53-1004928-02 9

Ruckus ICX 7150 Switch Hardware Installation Guide

10 53-1004928-02

About This Document

• Supported hardware and software..............................................................................................................................................................11

• What's new in this document........................................................................................................................................................................12

Supported hardware and software

This document is applicable for the various Ruckus ICX 7150 Ethernet switch models. The following tables list the device models and

rack mount kits supported.

TABLE 1 OS-dependent models

Model number Short description Introduced (OS) Currently supported

(OS)

Notes

ICX 7150-C12P Twelve GbE (124 W) PoE+ ports with two 1-GbE

uplink ports and two SFP+ 10-GbE optical

stacking or uplink ports

FastIron 08.0.60 Yes Fanless

Mountable on a desktop,

rack, wall, under a xed

surface, under a desk,

under a shelf, or using a

magnet

ICX 7150-24 Twenty-four GbE non-PoE ports with two 1-GbE

uplink ports and four SFP+ 10-GbE optical

stacking or uplink ports

FastIron 08.0.60 Yes Fanless

Mountable on a desktop,

rack, or wall

ICX 7150-24P Twenty-four GbE (370 W) PoE+ ports with two 1-

GbE uplink ports and four SFP+ 10-GbE optical

stacking or uplink ports

FastIron 08.0.60 Yes Two built-in fans

Mountable on a desktop,

rack, or wall

ICX 7150-48 Forty-eight GbE non-PoE ports with two 1-GbE

uplink ports and four SFP+ 10-GbE optical

stacking or uplink ports

FastIron 08.0.60 Yes Fanless

Mountable on a desktop,

rack, or wall

ICX 7150-48P Forty-eight GbE (370 W) PoE+ ports with two 1-

GbE uplink ports and four SFP+ 10-GbE optical

stacking or uplink ports

FastIron 08.0.60 Yes Two built-in fans

Mountable on a desktop,

rack, or wall

ICX 7150-48PF Forty-eight GbE (740 W) PoE+ ports with two 1-

GbE uplink ports and four SFP+ 10-GbE optical

stacking or uplink ports

FastIron 08.0.60 Yes Three built-in fans

Mountable on a desktop,

rack, or wall

NOTE

The AC power supply and fans are integrated with the device. The power supply or the fans are not eld replaceable units

(FRUs).

TABLE 2 Rack mount kits

Part number Short description Notes

ICX6400-C12-

MGNT

Magnet mount kit for ICX 7150-C12P. This is not a rack mount kit. It is a

magnet which could be used on a rack or on any surface that is magnetic

such as a metal desk or cabinet

Not included with the device. Optionally

orderable.

ICX7000-C12-

RMK

Rack mount kit for ICX 7150-C12P on 2-post racks Not included with the device. Optionally

orderable.

Ruckus ICX 7150 Switch Hardware Installation Guide

53-1004928-02 11

TABLE 2 Rack mount kits (continued)

Part number Short description Notes

ICX7000-C12-

WMK

Wall / under desk mount kit for ICX 7150-C12P Not included with the device. Optionally

orderable.

ICX7000-RMK Rack mount kit for 2-post racks Included with 24-port and 48-port ICX 7150

models.

XBR-R000295 Universal rack mount kit for 4-post racks Not included with the device. Optionally

orderable.

What's new in this document

This is a new document.

What's new in this document

Ruckus ICX 7150 Switch Hardware Installation Guide

12 53-1004928-02

Device Overview

• Hardware features..............................................................................................................................................................................................13

• License options.................................................................................................................................................................................................. 14

• Port-side view..................................................................................................................................................................................................... 15

• Nonport-side view.............................................................................................................................................................................................16

• Device management options........................................................................................................................................................................17

Hardware features

The Ruckus ICX 7150 oers the following hardware features and capabilities:

• 12, 24, or 48 auto-negotiating 10/100/1000 Mbps full duplex RJ-45 ports that can be used for downlink. These ports reside

on slot 1 of the switch and can be non-PoE, PoE class 3, or PoE+ ports.

TABLE 3 Number of PoE and PoE+ ports

Switch model Maximum number of PoE class 3 ports

supported in slot 1

Maximum number of PoE+ ports supported

in slot 1

ICX 7150-C12P 8 4

ICX 7150-24 0 0

ICX 7150-24P 24 12

ICX 7150-48 0 0

ICX 7150-48P 24 12

ICX 7150-48PF 48 24

• Two 10/100/1000Base-T full duplex RJ-45 ports that can be used as uplink data ports. These ports reside on slot 2 of the

switch.

• Two or four SFP+ optical 10-Gbps full duplex ports that can be used as stacking or uplink data ports. These ports reside on slot

3 of the switch.

• One built-in xed power supply unit (not a FRU) with a nonport-side power inlet.

• Up to three integrated fans (not FRUs) for cooling the system with sides-to-back airow.

• System LEDs

– Power status

– DIAG status

– Master/Slave status

– Cloud management status

– Software update status

• Status mode LEDs (not enabled currently)

– Port link status mode

– Port speed status mode

– PoE status mode

– Member ID status mode

– USB modes

• Management interfaces

– Mode switch button

Ruckus ICX 7150 Switch Hardware Installation Guide

53-1004928-02 13

– Reset button

– Out-of-band (OOB) GbE management port

– USB 2.0 general purpose Type-A port for le transfer with removable media (removable media not included with the

device)

– Type-C USB console port (Type-C USB cable not included with the device)

– RS-232 console port with RJ-45 form factor (RJ-45 console cable not included with the device)

License options

The Ruckus ICX 7150 switch has all the 1-GbE RJ-45 ports enabled by default including the two 1-GbE RJ-45 uplink ports in slot 2.

You can buy the device with some or all of the 1/10-GbE SFP+ uplink ports in slot 3 enabled for 1-GbE speed only. You can upgrade

the 1/10-GbE SFP+ uplink ports in slot 3 from 1-GbE to 10-GbE with an upgrade license. Refer to the Brocade FastIron Software

Licensing Guide for more details.

TABLE 4 License upgrade options

License Description

BR-ICX-7150-41U210-P-01 2-port SFP+ upgrade to 10-GbE for models with 4-port 1-GbE SFP

BR-ICX-7150-41U410R-P-01 Layer 3/routing feature upgrade and 4-port SFP+ upgrade to 10-GbE for models with 4-port 1-GbE SFP

BR-ICX-7150-210U410R-P-01 Add Layer 3/routing feature upgrade and add 2-port SFP+ upgrade to 10-GbE for models with 2-port SFP+

BR-ICX-7150C-21U210R-P-01 Layer 3/routing feature upgrade and 2-port SFP+ upgrade to 10-GbE for C12P model with 2-port 1-GbE

SFP

License options

Ruckus ICX 7150 Switch Hardware Installation Guide

14 53-1004928-02

Port-side view

FIGURE 1 Port-side view of ICX 7150-C12P

1. Type-C USB console port

2. Port status mode selection button and LEDs

3. System LEDs

4. Slot 1 (10/100/1000 Mbps RJ-45 downlink) ports

5. Slot 2 (10/100/1000 Mbps RJ-45 uplink) ports

6. Slot 3 (SFP+ uplink or stacking ports)

7. SFP+ Port X2 status LED

8. SFP+ Port X1 status LED

9. RJ-45 uplink port C2 RX/TX activity LED

10. RJ-45 uplink port C2 status LED

11. RJ-45 downlink port 8 RX/TX activity LED

12. RJ-45 downlink port 8 status LED

13. Out-of-band management port (RJ-45)

14. USB port

15. RJ-45 console port

16. Reset button

FIGURE 2 Port-side view of ICX 7150-24 and ICX 7150-24P

1. Type-C USB console port

2. Port status mode selection button and LEDs

3. System LEDs

4. RJ-45 downlink port 17 status LED

5. RJ-45 downlink port 17 RX/TX activity LED

6. RJ-45 uplink port C1 status LED

7. RJ-45 uplink port C1 RX/TX activity LED

8. SFP+ port X1 status LED

9. SFP+ port X2 status LED

10. Slot 3 (SFP+ uplink or stacking) ports

11. Slot 2 (10/100/1000 Mbps RJ-45 uplink) ports

12. Slot 1 (10/100/1000 Mbps RJ-45 downlink) ports

13. USB port

14. Out-of-band management port (RJ-45)

15. RJ-45 console port

16. Reset button

Port-side view

Ruckus ICX 7150 Switch Hardware Installation Guide

53-1004928-02 15

FIGURE 3 Port-side view of ICX 7150-48, ICX 7150-48P, and ICX 7150-48PF

1. Type-C USB console port

2. Port status mode selection button and LEDs

3. System LEDs

4. RJ-45 downlink port 29 status LED

5. RJ-45 downlink port 29 RX/TX activity LED

6. RJ-45 uplink port C1 status LED

7. RJ-45 uplink port C1 RX/TX activity LED

8. SFP+ port X1 status LED

9. SFP+ port X2 status LED

10. Slot 3 (SFP+ uplink or stacking) ports

11. Slot 2 (10/100/1000 Mbps RJ-45 uplink) ports

12. Slot 1 (10/100/1000 Mbps RJ-45 downlink) ports 37-48

13. Slot 1 (10/100/1000 Mbps RJ-45 downlink) ports 25-36

14. Slot 1 (10/100/1000 Mbps RJ-45 downlink) ports 13-24

15. Slot 1 (10/100/1000 Mbps RJ-45 downlink) ports 1-12

16. USB port

17. Out-of-band management port (RJ-45)

18. Reset button

Nonport-side view

FIGURE 4 Nonport-side view of ICX 7150-C12P

1. Kensington security slot 2. AC power supply socket

FIGURE 5 Nonport-side view of ICX 7150-24

1. AC power supply socket

Nonport-side view

Ruckus ICX 7150 Switch Hardware Installation Guide

16 53-1004928-02

FIGURE 6 Nonport-side view of ICX 7150-48

1. Management console port - RJ-45 2. AC power supply socket

FIGURE 7 Nonport-side view of ICX 7150-24P and ICX 7150-48P

1. Fan 1

2. Fan 2

3. Management console port - RJ-45 (available in the front panel for ICX

7150-24P)

4. AC power supply socket

FIGURE 8 Nonport-side view of ICX 7150-48PF

1. Fan 1

2. Fan 2

3. Fan 3

4. Management console port - RJ-45

5. AC power supply socket

Device management options

You can use the management functions built into the device to monitor the topology, port status, physical status, and other information to

help you analyze switch performance and to accelerate system debugging. The device automatically performs power-on self-test (POST)

each time it is turned on. Any errors are recorded in the syslog messages.

You can manage the device using any of the management options listed in the following table.

TABLE 5

Management options for the device

Management tool Out-of-band support Reference documents

Command line interface (CLI) Ethernet, serial connection, or USB console Brocade FastIron Command Reference Guide

Feature-based Conguration Guides

Standard SNMP applications Ethernet or serial connection Unied IP MIB Reference Guide

Device management options

Ruckus ICX 7150 Switch Hardware Installation Guide

53-1004928-02 17

TABLE 5 Management options for the device (continued)

Management tool Out-of-band support Reference documents

Brocade FastIron Web Management Interface Ethernet or connection via IP address Brocade FastIron Web Management Interface

User Guide

NOTE

Not all FastIron features are

supported via the web management

interface.

Brocade Network Advisor (BNA)

NOTE

BNA must be purchased separately.

Ethernet or serial connection Brocade Network Advisor documentation set

Device management options

Ruckus ICX 7150 Switch Hardware Installation Guide

18 53-1004928-02

Preparing for the Installation

• Safety precautions.............................................................................................................................................................................................19

• Facility requirements.........................................................................................................................................................................................21

• Quick installation checklist.............................................................................................................................................................................22

• Shipping carton contents................................................................................................................................................................................24

Safety precautions

When using this product, observe all danger, caution, and attention notices in this manual. The safety notices are accompanied by

symbols that represent the severity of the safety condition

Refer to Cautions and Danger Notices at the end of this guide for translations of safety notices for this product.

General precautions

DANGER

The procedures in this manual are for qualied service personnel.

DANGER

Before beginning the installation, see the precautions in “Power precautions.”

DANGER

The equipment ports are intra-building type and must not be directly connected to metallic outside plant (OSP) cable

conductors.

CAUTION

Changes or modications made to this device that are not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

CAUTION

Make sure the airow around the front, and back of the device is not

restricted.

CAUTION

Never leave tools inside the chassis.

CAUTION

To protect the serial port from damage, keep the cover on the port when not in use.

CAUTION

Do not install the device in an environment where the operating ambient temperature might exceed 45°C (113°F).

Ruckus ICX 7150 Switch Hardware Installation Guide

53-1004928-02 19

ESD precautions

DANGER

For safety reasons, the ESD wrist strap should contain a series 1 megaohm resistor.

CAUTION

Before plugging a cable into any port, be sure to discharge the voltage stored on the cable by touching the electrical

contacts to ground surface.

CAUTION

Static electricity can damage the chassis and other electronic devices. To avoid damage, keep static-sensitive devices in

their static-protective packages until you are ready to install them.

NOTE

Wear a wrist grounding strap connected to the chassis ground (if the device is plugged in) or to a bench ground.

Power precautions

DANGER

Make sure that the power source circuits are properly grounded.

DANGER

Make sure you use a power cord displaying the mark of the safety agency that denes the regulations for power cords in

your country. The mark is your assurance that the power cord can be used safely with the device.

DANGER

To reduce the risk of electric shock, disconnect all power cords before servicing.

DANGER

Disconnect the power cord from all power sources to completely remove power from the device.

DANGER

To avoid high voltage shock, do not open the device while the power is on.

DANGER

Batteries used for RTC/NVRAM backup are not located in operator-access areas. There is a risk of explosion if a battery

is replace by an incorrect type. Dispose of used components with batteries according to local ordinance and regulations.

CAUTION

Ensure that the device does not overload the power circuits, wiring, and over-current protection. To determine the possibility

of overloading the supply circuits, add the ampere (amp) ratings of all devices installed on the same circuit as the device.

Compare this total with the rating limit for the circuit. The maximum ampere ratings are usually printed on the devices near

the input power connectors.

Lifting and weight-related precautions

DANGER

Use safe lifting practices when moving the product.

Safety precautions

Ruckus ICX 7150 Switch Hardware Installation Guide

20 53-1004928-02

Page is loading ...

Ruckus Wireless Ruckus ICX 7150 Series Hardware Installation Manual

Ruckus Wireless Ruckus ICX 7150 Series Hardware Installation Manual

Related papers

Other documents