Kogan KBE14CWWT1A User guide

Brand: Kogan

Model: KBE14CWWT1A

Type: User guide

Kogan KBE14CWWT1A

The Kogan KBE14CWWT1A Smart Bulb is a versatile and convenient lighting solution that offers a range of features to enhance your home lighting experience. With its Bluetooth Mesh connectivity, you can easily control the bulb from your smartphone using the Kogan SmarterHome app, even without a Wi-Fi connection. The bulb's ability to connect to other Bluetooth Mesh devices, such as sensors and door locks, allows you to create automated scenes for added convenience and security.

The Kogan KBE14CWWT1A Smart Bulb features both cool and warm white light options, giving you the flexibility to adjust the ambiance of your space to suit your mood or activity. The bulb's dimmable design lets you customize the brightness level, creating the perfect atmosphere for relaxation, reading, or focused tasks.

Kogan KBE14CWWT1A

KOGAN SMARTERHOME™ 5W COOL

& WARM WHITE SMART BULB

(E14, BLUETOOTH MESH)

KBE14CWWT1A

For bulbs with a weight significantly higher than that of the bulbs for which they are a

replacement, attention should be drawn to the fact that the increased weight may reduce

the mechanical stability of certain light fixtures may impair contact making and bulb

retention.

IEC 60417 -6179-1

Bulb not suitable for use under dust and moisture.

SAFETY & WARNINGS

This smart bulb is only suitable for E14 Edison screw type light fixtures. It will not fit into any

other size or type of light fixture. Refer to the table below for the appropriate removal and

installation method.

Light Bulb Types

The oil from your hands can cause damage to certain types of light bulbs. It is highly

recommended to wear gloves while handling light bulbs.

Base Type

Removal/Installation Method

Edison Screw

Remove: Tw i s t b ul b c o un t e r-clockwise until it comes free.

Install: Tw i s t b u l b cl o c k wi s e u nt i l i t i s s e c ur e ly i n pl a c e .

Bayonet

Remove: Push the bulb upward then twist counter-clockwise until it

comes free.

Install: Insert the bulb into the fixture and gently twist clockwise until

the pins lock securely in place.

Tw i s t L o c k

Bi-pin

Remove: Using your thumbs, gently press the bulb upward and slowly

rotate the bulb counter-clockwise. When the bulb won’t rotate any

further, wiggle it slightly and remove it from the light fixture.

Note: Some bi-pin light fixtures feature a locking clip which will need to

be removed before the bulb.

Install: Insert the bulb into the fixture, lining up the two pins. Using

your thumbs rotate the bulb clockwise until it locks securely in place.

Replace the locking clip (if applicable).

Step 1: Tu r n o f f t h e p o w e r

• Ensure the light switch is in the off position before attempting to install or remove a

light bulb.

• If you are removing an old light bulb, give the bulb a few minutes to cool down

before touching it.

Note: Always test the temperature of globe with your fingertips before grasping it.

INSTALLATION

Step 2: Use a step ladder or stable chair

• If installing the light bulb in your ceiling, ensure you use a step ladder or stable chair

to reach the light fixture. Do not stand on your tiptoes to reach the light bulb.

• Ensure you are in a comfortable, stable position before installing the bulb.

Step 3: Installing the light bulb

• Remove the bulb from the packaging and install it into the light fixture. Do not

push or turn too hard as this may damage the light bulb.

Note:

Ensure that you’re using the correct bulb type and power rating for the light fixture.

If in doubt consult a qualified electrician before installing the bulb.

Install App

Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).

If you do not have a Kogan SmarterHome™ account, register or sign in with a verification

code sent by SMS.

To Re g i s te r

1. Ta p t o e n t e r r e g i s t r a t i o n p a g e .

2. The system automatically recognises your country/area. You can also select your

country code manually. Enter your email address and tap ‘Next.’

3. Alternatively, you can select ‘Register by mobile number' and enter the verification

code sent to you by SMS.

4. Create a profile on the next page to define your location and room.

CONNECT TO SMARTERHOME™ APP

Once the gateway has been setup and successfully paired the app, you can add additional

devices through the app to build a Bluetooth mesh network.

The gateway can communicate with other smart devices through Bluetooth so even if your

Wi-Fi becomes unstable or interrupted, the accessories will still operate normally.

Set Device in Pairing Mode

Install the bulbs into the appropriate light fitting and power them on.

When the device is first turned on, it may automatically enter pairing mode (light gently

breathing or flashing rapidly).

If not automatically in pairing mode when powered on, you can manually set the device in

pairing mode by turning the light switch on and off 3 times: the bulb will begin gently

breathing or flashing rapidly.

Note:

This product is intended to be used with the Smarterhome™ Smart Gateway

(KABLEMSHUBA). If available, please complete the installation of the Gateway first

and read the user guide before proceeding.

Note:

This device requires constant power for proper functionality.

Auto-connect

1. Ensure that the device is in pairing mode (light gently breathing or flashing rapidly).

2. Connect your smart phone to your 2.4GHz Wi-Fi network.

3. Open the “Kogan SmarterHome” app.

4. Ensure that Bluetooth is enabled on your smart phone.

5. Tap “+” in the upper right corner of the app’s home page to add a new device

through the network.

6. The app will automatically detect the device, tap “Go to add”.

7. If the device doesn't appear automatically, please select the "Bluetooth Mesh Light

Bulb" in the device list and follow the prompt to detect/connect your device.

8. The device will commence the pairing process and connect to the gateway and

app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are

kept close until connection is complete.

9. After successfully being added, you will have the option to rename the device and

assign it to a location. It will now be listed on the app’s home page. Tap the device

listing to enter its control page.

Smart&Bulb&(Bluetooth&Mesh)&

Connect the Device Through Gateway

1. Ensure that the device is in pairing mode.

2. Connect your smart phone to your 2.4GHz Wi-Fi network.

3. Open the “Kogan SmarterHome” app.

4. Select “Bluetooth Gateway” from the list of connected devices.

5. Ta p “ s e a r c h n e w d e v i c e ” i n t h e b o t t o m r i g h t c o r n e r o f t h e a p p t o s e a r c h f o r a n y

sub-devices.

6. Ensure that Bluetooth is enabled on your smart phone. If not, you will be prompted

to turn it on.

7. Confirm that the sub-device is in pairing mode (light gently breathing or flashing

rapidly) then tap “Lights is in a flash” to begin pairing to the gateway.

8. The device will commence the pairing process and connect to the gateway and

app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are

kept close until connection is complete.

9. After successfully being added, you will have the option to rename the device and

assign it to a location. It will now be listed on the app’s home page. Tap the device

listing to enter its control page.

Direct Bluetooth Connection

In situations where a Wi-Fi network and a gateway aren’t present, this device can be

connected to and controlled using your smartphone through Bluetooth. This method

however has a limited range and once the device is outside of the smartphone’s Bluetooth

range, the device will lose its connection and appear offline.

1. Ensure that the device is in pairing mode (light gently breathing or flashing rapidly).

2. Open the “Kogan SmarterHome” app.

3. Ensure that Bluetooth is enabled on your smart phone.

4. Tap “+” in the upper right corner of the app’s home page to add a new device

through the network.

5. The app will automatically detect the device, tap “Go to add”.

6. The device will commence the pairing process and connect to the gateway and

app. Ensure your phone, and the SmarterHome™ device are kept close until

connection is complete.

7. After successfully being added, you will have the option to rename the device and

assign it to a location. It will now be listed on the app’s home page. Tap the device

listing to enter its control page.

Smart&Bulb&(Bluetooth&Mesh)&

Adding a Connected Device to Gateway

1. Ensure that the device is in pairing mode (light gently breathing or flashing rapidly).

2. Connect your smart phone to your 2.4GHz Wi-Fi network.

3. Ensure that Bluetooth is enabled on your smart phone. If not, you will be prompted

to turn it on.

4. Open the “Kogan SmarterHome” app.

5. Select “Bluetooth Gateway” from the list of connected devices.

6. Ta p “ a d d d e v i c e f r o m l i s t ” i n t h e b o t t o m l e f t c o r n e r o f t h e a p p t o s e a r c h f o r a n y s u b -

devices.

7. Select the device(s) from the list you wish to add to the gateway then tap “confirm”.

Smart&Bulb&(Bluetooth&Mesh)&

Effective Range, Coverage Extension & Integrated Automation

• Each Gateway can control up to 128 devices at the same time.

• The maximum effective distance between the Gateway and the smart light is up to

40 meters (in open areas) and up to 20m with obstructions (the more obstructions,

the less the range).

• Each Bluetooth Mesh downlight/bulb creates a mesh network around itself and

extends the signal coverage of the gateway up to 8-15m (up to 8m indoors, and up

to 15m in open areas).

• The signal can be repeated/extended up to 8 mesh points (the furthest distance

that can be reached is by repeating the signal for 8 times/through 8 lights).

• All other Kogan SmarterHome Bluetooth Mesh products (such as security sensors,

door locks etc.) can connect to the Gateway via the extended mesh created by the

Bluetooth Mesh downlights or bulbs.

• These sensors are commonly used together with the light to create automated

scenes (when a PIR motion sensor detects movement it turns on the light etc.).

Example of typical Bluetooth Mesh home network

Router

Gateway

Bluetooth Mesh

Bulb

Bluetooth Mesh

Bulb

Motion

Sensor

Smart

Lock

Bluetooth Mesh

Downlight

Temperature

Sensor

Adding “SmarterHome” to the Google Home app

1. From the home page of the Google Home app, select the “+” icon to access the

‘Add and manage’ page.

2. Select ‘Set up device’, then under the Works with Google banner, select ‘Have

something already set up?’

3. Select the search bar and type ‘Smarter Home’ to locate the Kogan

SmarterHome™ service.

GOOGLE HOME CONTROL

Note:

You wi l l need to ha ve s et u p a Go og le Ho me ac co un t p ri or to li nki ng yo ur

Kogan SmarterHome™ device.

4. Ta p ‘A u t h o r i s e ’ t o g r a n t G o o g l e p e r m i s s i o n t o a c c e s s t h e S m a r t e r H o m e ™ a p p a n d

your devices.

5. From here, you will be prompted to sign into your SmarterHome™ account using

either your email or mobile phone number, depending on which method you used

to register your account.

6. Once connected, the app will display any compatible devices linked to your

SmarterHome™ account. From here you can assign them to rooms and set up any

routines.

7. Ta p o n a n y o f t h e d e v i c e s t o v i e w a l i s t o f a v a i l a b l e c o m m a n d s .

Note:

Please note that Google Home can only control the base/core functions of any

compatible SmarterHome™ devices. To make full use of this product’s smart

functionality, please use the Kogan SmarterHome™ app.

Adding “SmarterHome” to the Alexa app

1. From the home page of the Alexa app, select the “ ” icon in the top-right and

select Skills & Games from the sidebar.

2. Select the search bar and type ‘Smarter Home’ to locate the Kogan

SmarterHome™ skill.

AMAZON ALEXA CONTROL

Note:

You w il l n ee d to h ave s et up an Al exa account prior to linking your Kogan

SmarterHome™ device.

3. Ta p ‘ E n a b l e t o U s e ’ t o a d d t h e K o g a n SmarterHome™ skill to Alexa.

4. From here, you will be prompted to sign into your SmarterHome™ account using

either your email or mobile phone number, depending on which method you used

to register your account.

5. Ta p ‘A u t h o r i s e ’ t o g r a n t A l e x a permission to access the SmarterHome™ app and

your devices.

6. Once connected, the app will perform a search and display the devices linked to

your SmarterHome™ account.

7. When your devices have successfully connected to the Alexa app, you will be able

to control your Kogan SmarterHome™ devices via Alexa’s voice commands.

Note:

Please note that Alexa can only control the base/core functions of any compatible

SmarterHome™ devices. To make full use of this product’s smart functionality,

please use the Kogan SmarterHome™ app.

Power On/Off

To q u i c k l y turn the bulb on or off, tap the power icon to the right of the device name.

Reset

To r e s e t t h e d e v i c e back to its default settings, turn the relevant light switch on and off 10

times.

Settings

1. Ta p o n t h e n a m e o f t h e d e v i c e t o e n t e r t h e s e t t i n g s m e n u .

2. Ta p t h e power icon at the bottom of the screen to turn the bulb on or off.

OPERATION

Page is loading ...

Kogan KBE14CWWT1A User guide

Brand: Kogan

Model: KBE14CWWT1A

Type: User guide

Kogan KBE14CWWT1A

Download PDF

report

Kogan KBE14CWWT1A User guide

Kogan KBE14CWWT1A User guide

Related papers

Other documents