2. AGI
  3. A285/A286 Intake Hopper Tarp

AGI A285/A286 Intake Hopper Tarp Owner's manual

  • Hello! I'm your chat assistant. I've reviewed the installation instructions for the AGI Hopper Tarp A285/A286, which is compatible with various models from Westfield, AGI, Hutchinson, and Mayrath. This document provides clear steps on how to install the tarp for better water run-off. If you are looking for information about attaching the tarp, I'm ready to answer your questions.
  • How many tarp supports are needed?
    Where do the straps run to secure the tarp?
    Why does the tarp support have a peak?
30889 R1
Revised: MARCH 2021 1
A285/A286
Intake Hopper Tarp
Installation Instructions
Applicable Models:
•Westfield STX2, WRX, STX, TF, TFX, TFX2, W13 Series
•AGI XTA, WRX Series
•Hutchinson STX2, WRX, W13 Series
•Mayrath STX2, WRX, W13 Series
Attaching the Hopper Tarp
1. Attach three tarp support by locking it into the centre of the hopper guard. The tarp support provides a
peak in the tarp for better water run-off, and can be easily removed for intake hopper operation.
2. Pull the tarp over the hopper and secure the sides of the tarp with straps running under the intake hopper.
3. Secure the tarp at the hopper handle with straps running under the handle.
P.O. Box 39, Rosenort, Manitoba, R0G 1W0 Canada
Phone: (866) 467-7207 (Canada & USA) or (204) 746–2396
Fax: (866) 768-4852
Website: www.aggrowth.com
Email: [email protected]
©Ag Growth International Inc. 2021
Printed in Canada
/