NOTE
register your new purchase online
www.sauder.com
For immediate service,
our website is available
24 hours a day, 7 days a week
to order replacement parts,
access assembly tips,
register your product,
and view Sauder products.
Mon-Fri - 9am-5:30pm ET
United States and Canada (except holidays)
Consumer Services 1-800-523-3987
DO NOT RETURN YOUR UNIT
TO THE STORE
Contact us fi rst
Most replacement parts ship from our
facility in one or two business days.
www.sauder.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
The back pages of this book are French instructions.
Les pages de arrière de ce livre sont des instructions
françaises.
Record the date you purchased this unit and save the booklet for
future reference.
If you ever need to contact Sauder about this unit, refer to the lot #
and the model # when calling our toll-free number. For more
information about our furniture, company, or to order replacement
parts, please visit our web site.
05 / 16 / 13
Lot #: 353310
Date Purchased: ____________
Corner Computer Desk
Model # 412314
Assembly Instructions
PARTS IDENTIFICATION
While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help
While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help
distinguish similar parts from each other. Use this
distinguish similar parts from each other. Use this
PARTS IDENTIFICATION
PARTS IDENTIFICATION
to help identify similar parts.
to help identify similar parts.
ITEM DESCRIPTION QTY
A END 2
B RIGHT UPRIGHT 1
C LEFT UPRIGHT 1
D TOP 1
E SHELF 2
F BACK 2
G RIGHT FRONT LEG 1
H LEFT FRONT LEG 1
I RIGHT REAR LEG 1
J LEFT REAR LEG 1
K KEYBOARD FRONT 1
L KEYBOARD BACK 1
M KEYBOARD SIDE 2
N KEYBOARD SHELF 1
O DRAWER UPRIGHT 2
P SHELF MOLDING 2
412314
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
A
F
E
M
O
P
HARDWARE IDENTIFICATION
412314
HIDDEN CAM - 31 CAM SCREW - 16 CAM DOWEL - 15
HINGE - 2 KNOB - 1 CAM COVER - 4
U2 V2 W2
X Y Z
35GA
CABINET RIGHT - 1
35GB
CABINET LEFT - 1
35GC
DRAWER RIGHT - 1
35GD
DRAWER LEFT - 1
SCREWS SHOWN ACTUAL SIZE
SCREWS SHOWN ACTUAL SIZE
Using a SCREW that is too long will caus
Using a SCREW that is too long will caus
e
e
d
d
a
a
mage. Before beginning assembly, separate
mage. Before beginning assembly, separate
each type of SCREW. Carefully study the SCREW diagrams below
each type of SCREW. Carefully study the SCREW diagrams below
(
(SHOWN ACTUAL SIZE
)
)
.
.
Pay close attention to the color of each SCREW. You may receive extra hardware with your unit.
Pay close attention to the color of each SCREW. You may receive extra hardware with your unit.
HAMMER
1
TIP SHOWN ACTUAL SIZE
NO. 2 PHILLIPS SCREWDRIVER
ASSEMBLY TOOLS REQUIRED
GG
412314
BLACK 1-7/8” FLAT HEAD SCREW - 8 BROWN 1-1/2” FLAT HEAD SCREW - 4
GOLD 5/16” FLAT HEAD SCREW - 8
BLACK 1-1/4” FLAT HEAD SCREW - 2 BLACK 7/8” MACHINE SCREW - 1
SILVER 5/8” FLAT HEAD SCREW - 4 SILVER 9/16” LARGE HEAD SCREW - 2
AA BB
CC DD
EE FF
www.sauder.com/services
2
Look for this icon. It means a video assembly tip is available at:
www.sauder.com/services/tips
412314
Push thirty-one HIDDEN CAMS (U2) into the ENDS (A), UPRIGHTS (B and C), SHELVES (E), BACKS (F), DRAWER
UPRIGHTS (O), and SHELF MOLDINGS (P). Then insert the metal end of fifteen CAM DOWELS (W2) into the HIDDEN CAMS.
(15 used)
Arrow
Do not tighten the HIDDEN CAMS in this step.
Arrow
Arrow
Arrow
B
C
O
O
U2
W2
(31 used)
E
F
F
E
P
Do not insert CAM
DOWELS into these parts.
Do not insert CAM DOWELS
into these HIDDEN CAMS.
A
U2
U2
www.sauder.com/services
3
412314
(16 used)
Turn sixteen CAM SCREWS (V2) into the LEGS (G, H, I, and J).
G
H
I
J
V2
V2
www.sauder.com/services
4
412314
Fasten the CABINET RIGHT (35GA) and CABINET LEFT (35GB) to the DRAWER UPRIGHTS (O). Use four GOLD
5/16” FLAT HEAD SCREWS (GG) through holes #1 and #3.
1
2
3
1
2
3
Roller End
Roller End
O
O
GOLD 5/16” FLAT HEAD SCREW
(4 used in this step)
GG
Use second hole
www.sauder.com/services
5
Edge with CAM
DOWELS
412314
Fasten the LEGS (G, H, I, and J) to the ENDS (A) and SHELF MOLDINGS (P). Tighten eight HIDDEN CAMS.
A
P
A
P
G
H
I
J
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Edge with CAM
DOWELS
www.sauder.com/services
6
412314
G
H
I
J
E
F
F
E
Fasten the SHELVES (E) and BACKS (F) to the LEGS (G, H, I, and J). Tighten eight HIDDEN CAMS.
Unfi nished
surface
Unfi nished
surface
Surface with
HIDDEN CAMS
412314
www.sauder.com/services
7
Fasten the LEFT UPRIGHT (C) to the RIGHT UPRIGHT (B). Tighten three HIDDEN CAMS.
B
C
Unfi nished
surface
Unfi nished
surface
Finished
edge
Caution
Risk of damage or
injury. Hidden Cams
must be completely
tightened. Hidden
Cams that are not
completely tightened
may loosen, and parts
may separate.
To completely tighten:
Start Tighten
Arrow
Arrow
Maximum
210 degrees
Minimum
190 degrees
www.sauder.com/services
8
412314
Fasten the UPRIGHTS (B and C) to the TOP (D). Tighten four HIDDEN CAMS.
B
C
D
Unfi nished
surface
Short unfi nished edge
Maximum
210 degrees
Minimum
190 degrees
Arrow
www.sauder.com/services
9
412314
Fasten the SHELVES (E) and BACKS (F) to the UPRIGHTS (B and C). Use eight BLACK 1-7/8” FLAT HEAD
SCREWS (AA).
Fasten the ENDS (A) to the TOP (D). Tighten four HIDDEN CAMS.
Maximum
210 degrees
Minimum
190 degrees
Arrow
B
C
E
FF
E
A
A
AA
BLACK 1-7/8” FLAT HEAD SCREW
(8 used in this step)
D
G
H
I
J
www.sauder.com/services
10
412314
Fasten the DRAWER UPRIGHTS (O) to the TOP (D). Tighten four HIDDEN CAMS.
B
C
D
G
H
O
O
Roller End
Roller End
Maximum
210 degrees
Minimum
190 degrees
Arrow
www.sauder.com/services
11
412314
Fasten the KEYBOARD SIDES (M) to the KEYBOARD SHELF (N). Use two BROWN 1-1/2” FLAT HEAD SCREWS (BB).
Fasten the KEYBOARD SIDES (M) to the KEYBOARD BACK (L). Use two BROWN 1-1/2” FLAT HEAD SCREWS (BB).
Fasten the KEYBOARD BACK (L) to the KEYBOARD SHELF (N). Use two BLACK 1-1/4” FLAT HEAD SCREWS (CC).
BROWN 1-1/2” FLAT HEAD SCREW
(4 used in this step)
BB
BLACK 1-1/4” FLAT HEAD SCREW
(2 used in this step)
CC
L
M
N
M
Finished
surface
Finished
surface
Long fi nished edge
www.sauder.com/services
12
412314
Fasten two HINGES (X) to the KEYBOARD FRONT (K). Use four SILVER 5/8” FLAT HEAD SCREWS (EE).
Fasten the HINGES (X) to the KEYBOARD SHELF (N). Use two SILVER 9/16” LARGE HEAD SCREWS (FF).
N
K
SILVER 5/8” FLAT HEAD SCREW
(4 used in this step)
EE
SILVER 9/16” LARGE HEAD SCREW
(2 used in this step)
FF
X
www.sauder.com/services
13
412314
Fasten the DRAWER RIGHT (35GC) and DRAWER LEFT (35GD) to the KEYBOARD SIDES (M). Use four GOLD 5/16”
FLAT HEAD SCREWS (GG) through holes #1 and #3.
Fasten a KNOB (Y) to the KEYBOARD FRONT (K). Use a BLACK 7/8" MACHINE SCREW (DD).
M
M
K
Y
GOLD 5/16” FLAT HEAD SCREW
(4 used for the SLIDES)
GG
BLACK 7/8” MACHINE SCREW
(1 used for the KNOB)
DD
1
2
3
1
2
3
Roller End
Roller End
www.sauder.com/services
14
412314
Carefully stand your unit upright.
To insert the keyboard shelf into your unit, tip the front of the shelf down and drop the rollers on the shelf behind the rollers
on the unit. Lift the front of the shelf up and slide it into the unit.
To make adjustments to the KEYBOARD FRONT (K), loosen the SCREWS in the HINGES, make needed adjustments, and
tighten the SCREWS.
K
www.sauder.com/services
15
412314
(4 used)
To cover
HIDDEN CAMS
Push a CAM COVER (Z) onto each visible HIDDEN CAM
NOTE: Please read the next two pages for important warranty and safety information.
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
Z
50 lbs.
20 lbs.
25 lbs.
25 lbs.
www.sauder.com/services
1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a
period of fi ve years from the date of purchase against defects in materials or workmanship of Sauder furniture components. As
used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This
Warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.
2. There is no warranty coverage for defects or conditions that result from the failure to follow product assembly instructions,
information or warnings, misuse or abuse, intentional damage, fi re, fl ood, alteration or modifi cation of the product, or use
of the product in a manner inconsistent with its intended use, nor any condition resulting from incorrect or inadequate
maintenance, cleaning, or care. There is also no warranty coverage for rented products or any products purchased “used” or
“as is”, at a distress or going-out-of business sale, or from a liquidator.
3. As the exclusive remedy under this Warranty, Sauder will (at its sole option) repair or replace any defective furniture
component. Sauder may require independent confi rmation of the claimed defect and proof of purchase. Replacement parts
will be warranted for only the remaining period of the original Warranty. SAUDER SHALL HAVE NO LIABILITY for ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND and all such damages are EXCLUDED FROM THIS
WARRANTY, such as loss of use, disassembly, transportation, labor or damage to property on or near the product. Some states
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you.
4. This Warranty applies only to warranted defects that fi rst arise and are reported to Sauder within the warranty coverage
period. The Warranty cannot be transferred to subsequent owners or users of the product, and it shall be immediately void in
the event the product is resold, transferred, leased or rented to any third party or person other than the original purchaser.
5.
THERE ARE NO OTHER WARRANTIES APPLICABLE TO THIS PRODUCT. Under the laws of certain states, there
may be no implied warranties from Sauder and all implied warranties, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE are disclaimed where allowed by law. TO THE
EXTENT ANY IMPLIED WARRANTIES ARE APPLICABLE, ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO
THE DURATION OF THIS EXPRESS WARRANTY or the minimum period allowed by law, whichever is shorter. Some states
do not allow limitations on how long an implied Warranty lasts, so the above limitation may not apply to you.
6. For Warranty inquiries or claims, please visit our website www.sauder.com. You can also contact Sauder at
1-800-523-3987. Sauder may require Warranty claims to be submitted in writing to Sauder Woodworking Co., 502 Middle
Street, Archbold, OH 43502 USA. Please include your sales receipt or other proof of purchase and a specifi c description of
the product defect.
5-YEAR LIMITED WARRANTY
412314
412314
WARNING
Please use your furniture correctly and safely. Improper use can cause safety hazards,
or damage to your furniture or household items. Carefully read the following chart.
Look out for: What can happen: How to avoid the problem:
• Overloaded shelves and drawers.
• Improper loading can cause the product
to be top-heavy.
• Risk of injury.
• Top-heavy furniture can tip over.
• Overloaded shelves and drawers can
break.
• Never exceed the weight limits shown in
the instructions.
• Work from bottom to top when loading
shelves and drawers. Place the heavier
items on the lower shelves or in lower
drawers.
• Improperly moving furniture that is not
designed and equipped with casters.
• Furniture can tip over or break if
improperly moved.
• Physical injury. Furniture can be very
heavy.
• Breakage of tops - particularly with
double pedestal furniture (drawers at both
ends).
• Unload shelves and drawers from top to
bottom before moving the unit.
• Do not push furniture, especially on a
carpeted fl oor. Have a friend help you lift
the item and set it in place.
• Provide support to the center section of
the top when lifting the furniture.
• Placing TVs on furniture items that are
not designed to support a television is
hazardous.
• Risk of injury or death. TVs can be
very heavy. Plus the weight and location
of the picture tube tends to make TVs
unbalanced and prone to tipping forward.
• This product is not designed to support a
television.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
