Bush Furniture BDB145WH-03 Installation guide

Place the KD Cams into the

holes indicated in your assembly

instructions.

(See picture A)

• Insert the KD Cam into the hole with the

arrow pointing towards the hole.

Take the piece containing the KD

Cams and slide it onto the KD Bolts

attached to the appropriate side

panels, as indicated in your

assembly instructions.

(See picture B)

Tighten the KD Cams completely

to ﬁnish this portion of the

assembly.

(See picture C)

• The KD Cam should be tightened by

turning from 190 to 230 degrees.

HOW TO Tighten KD Cams

Click here or scan this QR Code to watch the video!

• (DO) Use a soft, lightly dampened

cloth to remove smudges and

dust from your work surface.

• (DO) Use soap and water.

• (DO) Wring the cloth out before

cleaning the work surface.

HOW TO Clean the Surface

Click here or scan this QR Code to watch the video!

• (DO NOT) soak the work surface.

• (DO NOT) use furniture polish.