AKG 983 WH

Whirlpool AKG 983 WH, AKR 682 AV, AKR 682 NB, AKR 682 WH Program Chart

  • Hello! I am an AI chatbot trained to assist you with the Whirlpool AKG 983 WH Program Chart. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the minimum height of the AKR 682 AV above the cooker?
    How do I remove the grease filter for cleaning or replacement?
    What type of bulbs are used in the AKR 682 AV?
    How do I replace the carbon filter?
    What is the function of the open/close valve switch on the AKG 983 model?
AKR 682
AKB 069 - AKG 983
5019 100 75046
INSTALLATIONSANGABEN
Mindestabstand zur Kochfläche: 65 cm (Elektroplatten), 75 cm (Gas-, Öl-,
Kohlekochplatten)
INSTALLATION SHEET
Minimum height above cooker: 65 cm (electric cookers), 75 cm (gas, gas oil
or coal cookers)
FICHE D'INSTALLATION
Distance minimale par rapport à la cuisinière: 65 cm (cuisinière électrique),
75 cm (cuisinière à gaz, mazout ou charbon)
INSTALLATIESCHEMA
Min. afstand van het kooktoestel: 65 cm (elektrische kooktoestellen) 75 cm
(kooktoestellen op gas, olie of kolen)
FICHA DE INSTALACIÓN
Distancia mínima desde los quemadores: 65 cm (quemadores eléctricos),
75 cm (quemadores a gas, gasóleo o carbón)
FICHA DE INSTALAÇÃO
Distância mínima do fogão: 65 cm. (fogões eléctricos), 75 cm. (fogões a gás,
óleo ou carbono)
SCHEDA INSTALLAZIONE
Distanza minima dai fuochi: 65 cm (fuochi elettrici), 75 cm (fuochi a gas,
gasolio o carbone)
ùüùü+ùùùþ
ü$12.)12.1.)2"0120" FP02!"0120" FP0120"
.0! #02!0. #0! #.
D
GB
F
NL
E
P
I
GR
AAF
5019 100 75046
AKR 682
AKB 069 - AKG 983
1
A
A
3
4
4
4
4
1cm
1
1
2
2
3
3
4
4
5
6
6
5-6
A
5
5
7
7
7
F
A
5019 100 75046
AKR 682
AKB 069 - AKG 983
1.
Control panel.
2.
Grease filters (inside the extractor grille).
3.
Lighting unit.
4.
Pull-out steam deflector.
REMOVING AND RENEWING OR
CLEANING THE GREASE FILTER-
Fig. 1
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Open the extraction grille (
b, c, d
).
4.
Remove the device fixing the grease filter (
e
).
5.
Remove the dirty grease filter.
6.
After replacing or cleaning the grease filter
(depends on model), remount in reverse
order, making sure the entire extraction
surface is covered.
REPLACING BULBS -
Fig. 1
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Open the extraction grille (
b, c, d
).
4.
Remove the burnt-out bulb. Only 40W max
E14 bulbs should be used.
5.
Remount the extractor grille.
FITTING OR RENEWING THE CARBON
FILTER -
Fig. 2
(except for model
AKG 983
)
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Open the extraction grille (
b, c, d
).
4. Fitting:
position the carbon filter over the
motor protection grille within the reference
marks (
f
) - the reference mark (
g
) on the edge
of the carbon filter should line up with the
arrow on the fan shroud (
h
), and turn
clockwise.
Removing:
turn anti-clockwise.
5.
Refit the extractor grille.
CONTROL PANEL
A.
Speed selector (except for
model
AKG 983
).
B.
Light switch.
C.
Extraction speed indicators.
D.
Open/close valve switch (only
AKG 983
).
a
d
b
c
1
4
3
2
e
e
Fig. 1
The
AKG 983
model must be connected to
an external extractor unit. Open the valve to
allow the extraction of cooking fumes.
CD B
0123 0 I
small amount
of steam
and fumes
large amount of steam
and fumes
BA
medium amount of
steam and fumes
C
f
g
h
BA
Fig. 2
The
AKB 069
model is supplied with the
lamp packaged separately inside the hood;
open the grille and screw the lampinto the
lampholder (positioned internally of the
hood next to the lighting unit, Fig. 1,
A
)
before turning on the extractor.
PRODUCT DESCRIPTION SHEET
F NL E PGBD GRI
/