Whirlpool AKG 983 WH Program Chart

AKG 983 WH
Whirlpool
Brand
Whirlpool
Model
AKG 983 WH
Category
Cooker hoods
Type
Program Chart

This manual is also suitable for

AKR 682
AKB 069 - AKG 983
5019 100 75046
INSTALLATIONSANGABEN
Mindestabstand zur Kochfläche: 65 cm (Elektroplatten), 75 cm (Gas-, Öl-,
Kohlekochplatten)
INSTALLATION SHEET
Minimum height above cooker: 65 cm (electric cookers), 75 cm (gas, gas oil
or coal cookers)
FICHE D'INSTALLATION
Distance minimale par rapport à la cuisinière: 65 cm (cuisinière électrique),
75 cm (cuisinière à gaz, mazout ou charbon)
INSTALLATIESCHEMA
Min. afstand van het kooktoestel: 65 cm (elektrische kooktoestellen) 75 cm
(kooktoestellen op gas, olie of kolen)
FICHA DE INSTALACIÓN
Distancia mínima desde los quemadores: 65 cm (quemadores eléctricos),
75 cm (quemadores a gas, gasóleo o carbón)
FICHA DE INSTALAÇÃO
Distância mínima do fogão: 65 cm. (fogões eléctricos), 75 cm. (fogões a gás,
óleo ou carbono)
SCHEDA INSTALLAZIONE
Distanza minima dai fuochi: 65 cm (fuochi elettrici), 75 cm (fuochi a gas,
gasolio o carbone)
ùüùü+ùùùþ
ü$12.)12.1.)2"0120" FP02!"0120" FP0120"
.0! #02!0. #0! #.
D
GB
F
NL
E
P
I
GR
AAF
5019 100 75046
AKR 682
AKB 069 - AKG 983
1
A
A
3
4
4
4
4
1cm
1
1
2
2
3
3
4
4
5
6
6
5-6
A
5
5
7
7
7
F
A
5019 100 75046
AKR 682
AKB 069 - AKG 983
1.
Control panel.
2.
Grease filters (inside the extractor grille).
3.
Lighting unit.
4.
Pull-out steam deflector.
REMOVING AND RENEWING OR
CLEANING THE GREASE FILTER-
Fig. 1
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Open the extraction grille (
b, c, d
).
4.
Remove the device fixing the grease filter (
e
).
5.
Remove the dirty grease filter.
6.
After replacing or cleaning the grease filter
(depends on model), remount in reverse
order, making sure the entire extraction
surface is covered.
REPLACING BULBS -
Fig. 1
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Open the extraction grille (
b, c, d
).
4.
Remove the burnt-out bulb. Only 40W max
E14 bulbs should be used.
5.
Remount the extractor grille.
FITTING OR RENEWING THE CARBON
FILTER -
Fig. 2
(except for model
AKG 983
)
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Open the extraction grille (
b, c, d
).
4. Fitting:
position the carbon filter over the
motor protection grille within the reference
marks (
f
) - the reference mark (
g
) on the edge
of the carbon filter should line up with the
arrow on the fan shroud (
h
), and turn
clockwise.
Removing:
turn anti-clockwise.
5.
Refit the extractor grille.
CONTROL PANEL
A.
Speed selector (except for
model
AKG 983
).
B.
Light switch.
C.
Extraction speed indicators.
D.
Open/close valve switch (only
AKG 983
).
a
d
b
c
1
4
3
2
e
e
Fig. 1
The
AKG 983
model must be connected to
an external extractor unit. Open the valve to
allow the extraction of cooking fumes.
CD B
0123 0 I
small amount
of steam
and fumes
large amount of steam
and fumes
BA
medium amount of
steam and fumes
C
f
g
h
BA
Fig. 2
The
AKB 069
model is supplied with the
lamp packaged separately inside the hood;
open the grille and screw the lampinto the
lampholder (positioned internally of the
hood next to the lighting unit, Fig. 1,
A
)
before turning on the extractor.
PRODUCT DESCRIPTION SHEET
F NL E PGBD GRI
  • Page 1 1
  • Page 2 2
  • Page 3 3

Whirlpool AKG 983 WH Program Chart

AKG 983 WH
Whirlpool
Brand
Whirlpool
Model
AKG 983 WH
Category
Cooker hoods
Type
Program Chart
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents