MODEL 6050/6100 POST MOUNT BASE KIT
120 Glasgow Avenue
Inglewood, California 90301
U.S.A.
6050-074-A-1-12
DoorKing Part Number
2600-674
Copyright 2012 DoorKing, Inc. All rights reserved.
Hardware for Connecting Arm:
2 1/4 inch bolt, 3 washers, brass bushing and locknut.
60” Connecting Arm
6050/6100
Gate Brac
ket
Refer to the manual for complete installation instructions.
Illustrations are to inventory the post kit.
This kit is designed for the 6050/6100 model swing gate operators only. This kit bolts to the bottom of the operator and mounts
directly into a poured concrete foundation.
Kit Includes:
Support Plate
(2) 2 1/4” O.D. Threaded Support Posts
30” Crank Arm
60” Connecting Arm
Locking Pin and Padlock
1 1/2” bolts
1” bolts
Hardware for Post Mount:
(2) 1 1/2 inch bolts. For support plate.
(2) 1 inch bolts. For support plate.
(3) Non-slip nuts. For existing threaded
studs on bottom of operator.
Bottom of Operator
Support
Plate
Locking Pin
and Padlock
30” Crank Arm
6050/6100 Crank Power Arm
-
1
DKS 6050 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
DKS 6050/6100 Pre 2016 User manual
-
DKS 6050 / 6100 Pad Mount Kit User manual
-
DKS 6050/6100 Quick start guide
-
-
-
-
DKS 6500 Swing Gate Accessories Pivot Arm User manual
-
-
-
