DKS 6300 Post Mount Kit User manual

MODEL 6300 POST MOUNT BASE KIT

120 Glasgow Avenue

Inglewood, California 90301

U.S.A.

6300-063-A-2-13

DoorKing Part Number

2600-263

This kit is designed for the 6300 model swing gate operator only. This kit bolts to the bottom of the operator and mounts directly

into a poured concrete foundation.

Kit Includes:

Support Plate

(2) 3 1/2” O.D. Threaded Support Posts

30” Crank Arm

60” Connecting Arm

Locking Pin and Padlock

Hardware for Support Plate:

Hardware for Connecting Arm:

2 1/4 inch bolt, 3 washers, brass bushing and locknut.

(6) 1 1/2 inch bolts. For support plate.

(4) Non-slip nuts. For existing

threaded studs on bottom of 6300.

Refer to the manual for complete installation instructions.

Illustrations are to inventory the post kit.

60” Connecting Arm

6300

Gate Bracket

Support

Plate

Bottom of 6300

Locking Pin

and Padlock

30” Crank Arm

6300 Crank Power Arm