Hardware for Pad Mount:
(6) 1 inch bolts, lockwashers and nuts for support legs.
(2) 1 inch bolts and nuts for support plate.
(2) 1 1/2 inch bolts and nuts. For support plate.
(3) Non-slip nuts. For existing threaded studs on bottom of operator.
1 1/2” bolts
1” bolts
Bottom of Operator
Supp
ort
Plate
Left Support Leg
1
” Bolts
Right
Support
Leg
MODEL 6050/6100 PAD MOUNT BASE KIT
120 Glasgow Avenue
Inglewood, California 90301
U.S.A.
6100-067-A-9-08
DoorKing Part Number
2600-671
Copyright 2008 DoorKing, Inc. All rights reserved.
This kit is designed for the 6050/6100 model swing gate operators only. This kit bolts to the bottom of the operator and mounts
directly to a level concrete pad.
Kit Includes:
Support Plate
Left and Right Support Legs
30” Crank Arm
60” Connecting Arm
Locking Pin and Padlock
Hardware for Connecting Arm:
2 1/4 inch bolt, 3 washers, brass bushing and locknut.
Locking Pin
and Padlock
30” Crank Arm
60”
Connecting Arm
605
0/6100 Crank Power Arm
60
50/6100
Gate Bra
ck
e
t
Refer to the manual for complete installation instructions.
Illustrations are to inventory the pad kit.
-
1
DKS 6050 / 6100 Pad Mount Kit User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
DKS 6050/6100 Jan 2016 - July 2018 User manual
-
-
DKS 6050/6100 Pre 2016 User manual
-
-
-
-
-
-
-
