2. BrickHouse Security
  3. W-DVR-AC
W-DVR-AC

BrickHouse Security W-DVR-AC Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the BrickHouse Security W-DVR-AC Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the maximum supported Micro SD card capacity?
    What recording modes are available?
    How do I connect the device to my WiFi network?
    How do I adjust the motion detection sensitivity?
    Can I manually set the recording time?
WiFi AC Adapter Hidden Camera
User’s Guide
WiFi
AC Adapter Hidden Camera
The WiFi
AC Adapter Hidden
Camera
is a high
definition
covert
DVR
that
supports up to a 32GB micro SD card.
The device
records continuous and/
or
motion-activated
video. It also can capture photos.
This
hidden
camera
is
powered by a standard, un- switched AC power outlet.
In the Box:
you will find the
WiFi
AC Adapter Hidden
Camera,
Micro SD Card
Reader,
and
this User’s Guide.
1.
Pinhole Camera
Lens
2. Micro SD Card Slot
3.
Reset
Button
4.
Indicator
Light
3
Getting Started
Mobile Setup
Before setup, insert the Micro SD card into the slot indicated in the
above diagram.
To set up the app, follow these steps:
1. Locate and download the app:
P2PLiveCam
2. Plug the AC Adapter into the Power Outlet
3. Go to your
WiFi Settings
and connect to the AC
Adapters
WiFi
(
CMxxxx-xxxxxxxxxxxx-xxxxxx)
4. Open application
5. Select the plus sign
(+)
on the right upper corner and select Add New
Online
Camera.
6. Scan the QR code located on the back of the
device.
If the QR code
does not scan,
manually enter
the
UID
code
listed
on the QR label.
7.
Enter default
password:
(
8888
)
and then select OK.
8. You will then be directed to the
Live Video
Tab. A
message
will appear
informing
you that y o u r
device
is connected.
If you unplugged the device to scan the QR Code, Please
follow the next steps.
9. Plug the AC adapter into a power outlet
10. Once the connection is
established
go to the
P2PLiveCam
App.
11.
Camera
is now online.
Note: If more than
2minutes have elapsed
without
establishing
a connection,
you will notice the cog
wheel
icon on the right side of the cam info tab. Select
reconnect and
allow
60 seconds for connection.
Configuring your Device
1. To open
device configuration settings,
select the Cog
Wheel
icon.
2. Go to
Advance
Config.
Administrator will default leave the Password
field blank and select OK.
Alarm Configuration
Motion Detection:
Initially,
motion detection will be
disabled.
Select the drop
down to
configure
the detection
sensitivity level
to pick up
activity.
1 is the
highest sensitivity
level.
Alarm Interval: To reduce
multiple alarm triggers
in rapid
succession,
this
setting allows you to set the time of which motion detection can
trigger
again
when
activity
is detected
WiFi Configuration
1. Select your
WiFi SSID
from drop-down menu
2.
Enter
your
WiFi SSID
password
SD Configuration
These settings allow you to select the way local storage is recorded:
1. Select from the three options:
Close,
On
Alarm,
All Day
2. Select time for
file
recording
3. Loop
recording means
that the
camera continuously
records without
stopping
PTZ Configuration
This feature
is not
available
for fixed cameras.
Time Settings
Time and Date will be configured based on your Mobile Network. You
can, however enter it manually:
Change
P2P access Password
1.
Enter Current
Password and enter New Password
Note: If you forget your password, you will need to
delete
the
camera
and reset
device
to
relearn
it back into your network.
Camera Reboot
If your
device
is not
responding
or you would
like
to reset the
default
settings, reboot the
device
by
pressing
the
Reset
button as
indicated
in the
above diagram.
WHEN YOU NEED TO KNOW.
/