• Snap track mountable relay module.
• 12VDC to 24VDC operation.
• Positive (+) or negative (-) ultra sensitive trigger
(3VDC to 24VDC @ 20mA minimum).
• DPDT contacts rated at 2 amp/120VAC/28VDC.
• Relay status LED.
• Remote LED status output.
• Snap track mountable (order part # ST3).
Board dimensions (approximate): 3"L x 2.5"W x 1"H
RBR1224
Electronic Toggle/Ratchet Relay
Rev. DSRBR1224 - G14J
Overview
Specifications
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Applications
• Use with PGM alarm control panel outputs.
• Electronically shunt-alarm zones,
door control or keypads.
• Interfaces with wireless receivers.
• Converts momentary to maintained contacts.
2.5"
3.0"
0.13"
0.12"
2.3"
2.8"
0.156"
Mounting Diagrams
ST3 Mechanical Drawing