• Model 6062 programmable timer is suitable for many functions that require
a timed operation e.g. Access Control Applications, Siren/Bell Cut Off
Module, Dialer Delay, Guard Tour Supervisory Timer, etc. Some optional
functions include: One Shot, Delayed Release, Delayed Operate, Delayed
Pulse and Pulser/Flasher.
• Quick and extremely accurate time range adjustment
from 1 sec. to 60 min.
• LED indicates relay is energized.
• Triggers via positive DC (+) voltage, dry contact
closure, or removal of contact closure.
• Selectable relay activation at the start or end of the
timing cycle.
• One (1) second momentary relay activation at the end
of the timing cycle (eliminates the need to use two (2)
timers for this function).
• Built-in reset feature which cancels timing cycle.
• Repeat (pulser/flasher) mode.
• Snap Trac compatible (order Altronix model #ST3)
• DIN Rail Mount version available
(order Altronix model # DTMR1).
Board dimensions (approximate): 3"L x 2.5"W x .75"H
6062, DTMR1 Multi-Function Timer
Rev. DS6062_DTMR1- A04F
Overview
Specifications
6062/DTMR1
• 12VDC or 24VDC operation is selectable.
• Form "C" relay contacts are 8 amp at 120VAC/28VDC.
• Current Draw: Stand-by 3mA, Relay Energized 40mA.
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
ST3 Mechanical Drawing
3.4375
2.75
2.6875
.875
.125
.3125
3.25
.625
6062 Mechanical Drawing
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Danfoss VLT® 6000 HVAC SW3.0x Operating instructions
-
-
-
-
-
-
Danfoss VLT6000 Inst./Oper/Maint Operating instructions
-
GSI Outdoors VLC User manual
-
Magnetek M-FORCE® General Purpose (GP) 500 575/600 Drive Owner's manual
-
Trane TR1 6225 Operating instructions
