• This unit converts a low voltage AC input into 6VDC, 12VDC or 24VDC output.
These general purpose power supplies have a wide range of applications for
access control, security and CCTV system accessories that
require additional power.
• 6VDC, 12VDC or 24VDC selectable outputs.
• 1.2 amp @ 6VDC or 12VDC supply current or
.75 amp @ 24VDC supply current.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Battery short circuit protection (circuit breaker).
• Built-in charger for sealed lead acid
or gel type batteries.
• Maximum charge current .3 amp.
• Automatic switch over to stand-by battery when
AC fails (zero voltage drop).
• AC input and DC output LED indicators.
• Extremely compact design.
• Includes Snap Trac (Altronix model # ST3)
and mounting clips for DIN Rail mounting capability.
DPS1 Linear Power Supply/Charger
Rev. DSDPS1 - A23F
Overview
Specifications
ST3 Mechanical Drawing
3.437
2.75
2.6875
.125
.3125
3.25
.625
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Board Dimensions (approximate):
3”L x 2.5”W x 1.5”H
0.13"
2.3"
0.13"
2.8"
2.5"
3.0"
Ø0.156"
