DPS3

Altronix DPS3 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Altronix DPS3 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
This unit converts a low voltage AC input into 6VDC, 12VDC or 24VDC output.
These general purpose power supplies have a wide range of applications for
access control, security and CCTV system accessories that
require additional power.
6VDC, 12VDC or 24VDC selectable outputs.
2.5 amp supply current.
Filtered and electronically regulated output.
Short circuit and thermal overload protection.
Battery short circuit protection (circuit breaker).
Built-in charger for sealed lead acid
or gel type batteries.
Maximum charge current .3 amp.
Automatic switch over to stand-by battery when
AC fails (zero voltage drop).
AC input and DC output LED indicators.
Extremely compact design.
Includes Snap Trac (Altronix model # ST3)
and mounting clips for DIN Rail mounting capability.
DPS3 Power Supply/Charger
Rev. DSDPS3 - A23F
Overview
Specifications
ST3 Mechanical Drawing
3.437
5
2.75
2.6875
.875
.125
.3125
3.25
.625
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Board Dimensions (approximate):
3.5”H x 2.75 ”W x 1.75 ”H
3.5"
3.0"
0.35"
0.16"
2.75"
2.25"
Ø0.156"
/