FläktGroup LQBZ-02 Cowl Installation guide

FläktGroup DC_9157GB 20180326_R0 Speciﬁcations are subject to alteration without notice

LQBZ-02 COWL

INSTALLATION INSTRUCTION

LOCATION OF OUTLET

The cowl is not fitted at the factory. Fit the cowl as follows:

A. If fitted at the fan outlet, place the protective screen centrally

across the fan outlet as shown in Fig. 1.

B. Fit the cowl top panels centrally over the protective screen and

secure it with self-tapping screws as shown in Fig. 2.

C. Secure the cowl side panels to the unit casing and to the top panel

by means of self-tapping screws as shown in Fig. 2.

Protective screen

Self-tapping-screws

(not included in the delivery)

Fig. 1

Self-tapping-screws

(not included in the delivery)

Top panel

Side panels

(one right-hand panel and

one left-hand panel)

Fig. 2