Hager VME01SPD Protection Devices Surge Protection Kit User manual

Protection Devices

Surge Protection Kit

ZD0923

1. Busbar

2. 16mm sq earth cable

3. Type I+II Surge Protection

Device

VME01SPD

Installation

Instructions

Move the main switch over 2 modules and clip the Surge

protection device on the right hand side of the main switch.

Fit the16mm earth cable into one of the terminals in the top

of the SPD and terminate in the earth bar. Torque to 3.6Nm.

Push the busbar firmly against the Surge protection device

making sure the cables below are secure secure and torque back

to 3.6Nm.

Surge Protection Kit

Loosen the bottom terminals on the Main switch and Surge

protection device and insert the busbar into the rectangle

slots above the cage terminals.

SPA090 (L - N), SPA090N Replacement Cartridges

0,25 Nm

PZ2

U max. / I max. AC : 250 V 1,5 A

125 V / 1 A (UL)

U max. / I max. DC : 30 V / 1 A

0,14 - 1, 5 mm²

AWG 28 - 16

7 mm 7 mm

SPA911

Replace

Red