Illumina Direct TST2042A Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Illumina Direct TST2042A Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ISSUED 05-2014
PACKAGE CONTENTS
1OF3
STYLE NUMBER: TST2042A
A
B
C
D
PART
DESCRIPTION
QUANTITY
A
B
C
D
Finial
Shade
Harp
Base
1pc
1pc
1pc
1pc
WARNING:
CAUTION:
Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by switching
off the circuit breaker or removing the fuse.
These instructions are provided for your safety. It is very important that they are read completely before the
installation of your fixture. We strongly recommend that a professional electrician install the fixture.
Disconnect fixture from the power source before replacing the bulb(s), making sure that bulb(s) had sufficient
time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.
Do not touch the bulb with bare hands use a cloth or glove.
WARNINGS AND CAUTIONS
Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
Estimated Assembly Time: 10 - 15 minutes
Bulb Recommended: (1) Medium Base (3-Way) 150W Maximum, Alternate bulb (1) CFL (3-Way)
No Tools Required for Assembly
1-866-535-1869
www.illuminadirect.com
Phone #:
E-mail:
website:
PREPARATION
www.illuminadirect.com
1-866-535-1869
UM-TST2042A
2OF3
PART NUMBER
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
REQ.
NO.
1
UM-TST2042A
FINISH: BRONZE
13”Dia.
(1) 150W
Bulb
(Not Supplied)
Medium
Base 3-Way
6”Dia.
9”
26.5”
S1638BE Shade
1
1
3OF3
INSTALLATION INSTRUCTIONS
STYLE NUMBER: UM-TST2042A
STEP 2:
a. Place the Shade onto the top end of the Harp and
secure with the Finial. Hand tighten until snug.
STEP 1:
a. Insert the Harp by pressing the bottom ends of the Harp
into the harp clips.
STEP 3:
a. Install bulbs (not included). (1) Medium Base (3-Way)
150W Maximum, Alternate bulb (1) CFL (3-Way).
Your fixture is now assembled and ready to use. Enjoy!
Harp
Harp Clip
Base
Finial
Shade
Harp
Socket
Bulb (not
included)
/