Trend Lighting TT7233-66, TT5110-76, TTB420-26 User manual

Hello, I've reviewed the installation instructions for the TREND by ACCLAIM LIGHTING TTB420-26 lamp. The document outlines the necessary steps to assemble the lamp, including installing the bulb, attaching the harp and shade, and securing them with the finial. I'm also aware of the safety recommendations, such as turning off the power before beginning and consulting a qualified electrician for any wiring issues. I'm ready to answer any specific questions you might have about the product or its installation process.
What should I do before installing the fixture?

What should I do if I am unfamiliar with proper electrical wiring?

What is the first step in assembly?

TTB420-26

INSTALLATION INSTRUCTIONS

Please read carefully and save these instructions, as you may need them at a later date.

CAUTION

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

qualified electrician.

Remove the fixture and the mounting package from the box and make sure that no parts are

missing by referencing the illustrations on the installation instructions.

WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit

conductor. Min 90ºC supply conductors.

Turn off the main power at the circuit breaker before installing the fixture, in order to prevent

possible shock.

ASSEMBLY AND INSTALLATION

1. Install the bulb(7) into the socket. Make sure the wattage of bulb does not exceed the rated max.

power.

2. Attach the harp(3) to the body(5).

3. Put the shade(2) over the harp(3), and secure it with the finial(1).

DO NOT USE BARE HANDS TO TOUCH THE BULB.

INSTALLATION IS NOW COMPLETE

1.FINIAL

2. SHADE

3.HARP

4. SWITCH

5.BODY

6.CORD

7.BULB