Page is loading ...
Grab Bars
5215
TECHNICAL DATA
2-1/4"
57 mm
7/8"
22 mm
Assist Bars
500 Series
3"
76 mm
2-3/8"
60 mm
MATERIALS: Assist bar posts are made in zinc die cast alloy. Castings are polished
and plated with chrome, polished brass or white polyester powder coat.
Bars are 7/8” O.D. x (21 gauge) type 304 stainless steel and are
chrome plated, polished brass or white polyester powder coat.
INSTALLATION: Assemble posts and bar by tightening 1/4" x 20" x 1-1/2" nylon fastener
under each post until bar is secure. Install posts and bar with
3 - #8 x 1-1/2" flat head stainless steel screws per post.
Note: 500 series grab bars are engineered to meet 300 lbs. pull when properly installed.
SPECIFICATION: Surface mounted assist bar shall be model__________________________
(fill in model number) by Liberty Hardware
®
Manufacturing Corporation.
"A"
"B"
(448 mm)
(391 mm)
(270 mm)
(213 mm)
(406 mm)(229 mm)
17-5/8"
15-3/8"
16"
(651 mm)
(594 mm)
(610 mm)
25-5/8"
23-3/8"
24"
10-5/8"
DIM "B"
8-3/8"DIM "A"
9"LENGTH
MATERIALS: Unit is fabricated of 1-1/4" diameter 18 gauge type 304 stainless steel tubing with #4 satin finish and knurled grip. Back plate is 1/4”
thick, one piece design with supports and is molded out of solid aluminum. Tubing is heliarc welded and is assembled onto a swivel
hinge. A stainless steel wall retaining clip is included to insure that bar is held in the upright position.
INSTALLATION: Unit absolutely must be secured to in-wall reinforcement backing capable of withstanding a minimum 500 pounds download pull. Unit is
attached with 4 bolts with a minimum 1/4” (6 mm) diameter and the wall retaining clip is attached at the proper height and centered to
receive the tubing when lifted to the upright position.
SPECIFICATION: Surface mounted grab bar shall be model__________________________
(fill in model number) by Liberty Hardware
®
Manufacturing Corporation.
1-1/4"
32 mm
3-3/4"
121 mm
5-23/32"
145 mm
8-1/16"
204.3 mm
30-5/16"
770 mm
10-15/32"
266 mm
11-13/32"
290 mm
20"
508 mm
Liberty Hardware
®
Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com
©2008 LHMC, A Masco Company
/
