Franklin Brass 5682RH Dimensions Guide

Brand: Franklin Brass

Model: 5682RH

Type: Dimensions Guide

Franklin Brass 5682RH is a stylish and functional 90-degree angle grab bar, perfect for adding safety and stability to your bathroom. Made of durable 18 gauge type 304 stainless steel, this grab bar is built to last and can support up to 500 pounds. The 16-inch length provides ample support, while the 32-inch height makes it easy to reach from a seated position. The grab bar is easy to install, with included mounting hardware for both wood and masonry surfaces. For added peace of mind, wood blocking is recommended behind all wall surfaces.

Grab Bars

1-1/2 in. x 16 in. x 32 in.

90 DEGREE ANGLE BAR, RIGHT

TECHNICAL DATA

16"

406 mm

1.5"

38 mm

28"

711 mm

Ø2.37"

Ø60.3 mm

Ø3.06"

Ø77.6 mm

Ø1.5"

Ø38 mm

32"

813 mm

MATERIALS: Tubing is of 18 gauge type 304 stainless steel. Wall flanges are 14 gauge type 304 stainless steel and flange covers are 20 gauge

type 304 stainless steel.

INSTALLATION: Install grab bar with 3 - #10 x 2" pan head stainless steel screws provided for each end wall flange and 2 - #10 x 2" pan head stainless

steel screws provided for each center wall flange. Slide cover flanges over wall flanges and press firmly to complete installation.

OPTIONAL FASTENER INFORMATION:

Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following fasteners are suggested:

Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.

SPECIFICATION: Surface mounted 90 degree angle bar shall be model ____________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.