MATERIALS: Wall Flange - 18 Gauge Stamped Type 304 Stainless Steel
Shelf & Towel Bar Tubing - .028 (23 Gauge) 3/4" O.D. Type 304 Stainless Steel Tubing
Crossbars - .025 (23 Gauge) 3/8" O.D. Type 304 Stainless Steel Tubing
Wall Plate - Steel x 13 Gauge, Nickel Plated
INSTALLATION: Remove folded shelf assemble from package. Rotate assembly until shelf,
bar and wall flanges are perpendicular to one another. Securely tighten shelf
and bar screws (4) on back side of wall flanges.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following fasteners are
suggested: Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted towel shelf with 1 bar shall be model ____________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
2-1/8"
54 mm
5-7/8"
149 mm
9-7/8"
251 mm
6-3/8"
162 mm
4-1/8"
105 mm
8-1/2"
216 mm
"A"
"B"
4-7/8"
123.8 mm
Towel Shelf
Towel Shelf
43618-ST & 43624-SN
TECHNICAL DATA
Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com
©2011 LHMC, A Masco Company
CP4764
(664 mm)
(610 mm)
(511 mm)
(457 mm)
(610 mm)(457 mm)
26-1/8"
24"
24"
20-1/8"
DIM "B"
18"DIM "A"
18"LENGTH
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Franklin Brass 5736W Specification
-
-
Eagle Group 1848E Datasheet
-
Moen 5208-241PS Installation guide
-
-
-
-
Eagle Group CCS-60-1 Datasheet
-
Intermetro LT60BSB Datasheet
-
Drolet CAPE TOWN 1800 CAST IRON WOOD STOVE Owner's manual
