Franklin Brass 607C Installation guide

Brand: Franklin Brass

Model: 607C

Type: Installation guide

Franklin Brass 607C is a concealed mount toilet paper holder that provides a stylish and functional solution for your bathroom. Constructed from high-quality materials, this product ensures durability and longevity, making it an excellent choice for frequent use. The concealed mount design allows for a clean and seamless look, complementing any bathroom décor. The Franklin Brass 607C is designed for easy installation, making it a great option for DIY enthusiasts. It requires a 2.75-inch diameter hole to be cut into the wall, providing a secure and stable hold.

Recessed Fixtures

MATERIALS: Chrome plated recessed shells are stamped from 21 gauge special alloy brass strip, highly polished and chrome plated. Stainless steel

recessed shells are stamped from 22 gauge corrosion resistant type 304 stainless steel and are polished or satin. Projecting posts are

die cast from highest quality virgin zinc alloy (Zamak) to meet ASTM standard B-86. Die casts are highly polished and plated. Roller

material as listed under each model number. All rollers are spring actuated.

INSTALLATION: Cut out wall opening 5-1/4" x 5-1/4" x 2" depth. If wood block available install recessed shelf into opening using 2 - #8 x 1-1/4" flat head

nickel or brass plated steel screws provided. If wood blocking is not available use optional 600R, 600BR, 601R or 601BR recessed

wall clamps.

SPECIFICATION: Recessed paper holder shall be model ____________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.

RECESSED PAPER HOLDER - 657B

TECHNICAL DATA

Recessed Fixtures

MATERIALS: Recessed Item - Stamping Brass, 20 Gauge

Post - Zinc Casting

Toilet Paper Holder - Stamping Brass

Hood - Stamping Brass

INSTALLATION: Cut a square hole in wall 12" x 5-1/4". Fasten with wood screws provided into the wood backing or into studs.

OPTIONAL FASTENER INFORMATION:

Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following fasteners are

suggested: Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.

SPECIFICATION: Recessed twin roll paper holder with hoods shall be model ____________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.

RECESSED TWIN ROLL PAPER HOLDER

WITH HOODS - 619

6-1/4"

159 mm

127 mm

10-5/32"

258 mm

12-3/4"

323.9 mm

6-3/8"

161.9 mm

3-3/4"

95 mm

1-7/8"

47.6 mm

1-3/4"

44 mm

2-5/8"

66.7 mm

1-3/4"

44.5 mm

5-15/16"

150.8 mm

101.6 mm

4-7/8"

124 mm

6-1/4"

159 mm

Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com

Franklin Brass 607C Installation guide

Franklin Brass 607C Installation guide

Franklin Brass 607C Installation guide

Related papers

Other documents