Page is loading ...
Lahara
™
MATERIALS: Base Plate, Posts - Zinc Die Cast
18" & 24" Bars - Brass Tube
Wall Plate - Steel, Zinc Plated
INSTALLATION: Mount wall plate bracket(s) per installation instructions with supplied
fasteners. Slip product over wall plate(s) and tighten set screws until secure.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is
not available, the following fasteners are suggested:
Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted towel bar shall be model ____________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
18 in. & 24 in. TOWEL BAR
TECHNICAL DATA
3-3/4"
94 mm
Lahara
™
MATERIALS: Base Plate, Post - Zinc Die Cast
Wall Plate - Steel, Zinc Plated
INSTALLATION: Mount wall plate bracket(s) per installation instructions with supplied
fasteners. Slip product over wall plate(s) and tighten set screws until secure.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not
available, the following fasteners are suggested:
Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted single robe hook shall be model__________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
SINGLE ROBE HOOK
(664 mm)
(613 mm)
(510 mm)
(460 mm)
(610 mm)(457 mm)
26-1/8"
24-1/8"
24"
20-1/8"
DIM "B"
18-1/8"DIM "A"
18"LENGTH
" A "
" B "
2-7/8"
73 mm
2-3/8"
60 mm
2"
50.8 mm
5/8"
16 mm
Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com ©2009 LHMC, A Masco Company
/