2. Baxton Studio
  3. BBT5317-Light Beige

Baxton Studio BBT5317-Light Beige, BBT5317-Grey, BBT5317-Grey-Otto-Set, BBT5317-Light Beige-Otto-Set Assembly Instructions

  • Hello! I've reviewed the provided assembly instructions for the BBT5317 chair. This document includes a detailed parts list, hardware list, step-by-step assembly instructions with diagrams, and safety cautions. I'm ready to answer any questions you have about the assembly process or the components of this chair.
  • What tools are needed for assembly?
    Should the nuts and bolts be fully tightened right away?
    What should be avoided while tightening nuts or bolts?
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provided).
ASSEMBLY INSTRUCTIONS
PART LIST
ITEM DESCRIPTION QTY
A SEAT 1 PC
B BACK 1 PC
C SUPPORT WOOD 1 PC
D ARM 2 PCS
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBB BOLT M8 x 50mm 11 PCS
2 M8 FLAT WASHER 3 PCS
3 M8 SPRING WASHER 11 PCS
4 WOOD DOWEL M10 x 40mm 4 PCS
5 WOOD BUTTON DIA 18.5mm 6 PCS
6 M5 ALLEN KEY (BALL SHAPE) 1 PC
1 of 3
C
4
B
A
2
3
1
6
STEP 1 STEP 2
x 3
ASSEMBLY INSTRUCTIONS 2 of 3
3
1
6
5D
C1
3
6
3
1
5
6
D
1
3
6
A
STEP 3
STEP 4
x 3
x 3
Step 3.1
Step 3.2
Step 3.3
Step 4.2
Step 4.1
Step 4.3
ASSEMBLY INSTRUCTIONS 3 of 3
STEP 5
/