2. Baxton Studio
  3. RH331C-Sand/Dark Brown-7PC Dining Set

Baxton Studio RH331C-Sand/Dark Brown-7PC Dining Set Assembly Instructions

  • Hello! I have analyzed the assembly instructions for the 7008T table and RH331C chair. This document outlines the step-by-step process with illustrations. It includes a list of parts and hardware required, and cautions regarding the tightening of nuts and bolts. I am ready to assist you with any questions you may have regarding the assembly process or the content of this document.
  • Should I fully tighten the nuts and bolts immediately?
    Is over-tightening of the nuts and bolts allowed?
    Where should I keep the hardware parts?
C
C
B
ASSEMBLY INSTRUCTIONS
MODEL : 7008T
Read this instruction carefully, remove all wrapping material, staples and straps from the carton. See hardware and furniture part list.
For guidance. Be sure you have all wooden furniture parts on a clean and soft surface to prevent from being scratched. Follow the figure to
start assembling.
Caution:
1. Do not FULLY –TIGHTEN the nut or bolt until all nut or nut bolt is ready to assembled.
2. Do not OVER- TIGHTEN the nut or nut bolt to avoid causing damages to the thread.
3. Keep all hardware part out of reach of children.
PART LIST
No.
B
A
DESCRIPTION
TABLE TOP
TABLE LEG
QTY
1 PC
4 PCS
No.
4
3
2
1
STEP 1
HARDWARE LIST
DESCRIPTION
FLAT WASHER 6/19"
SPRING WASHER 6/13"
JCBC SCREW M6 X 70MM
M4 ALLEN KEY
QTY
8 PCS
8 PCS
8 PCS
1 PC
STEP 2
COMPLETED TABLE ASSEMBLY
/