Midmark Synthesis® Cabinetry Installation guide

Type
Installation guide
1
TP200 Rev. A
003-2819-00 Rev. AA1 (1/16/20)
Contents:
Installation ...........1-3
Exploded View ........ 4
Special Tools:
none
Language of origin: English
Tall Cabinet Drawer Single Keyed
Lock Installation [002-1903-xx]
Step 1:
Remove drawers and slides as needed from cabinet.
Remove screws (3) from Mullion inside the cabinet to release.
Mullion
Screw
Screw
Slides
Note
This install can be used for any Tall Cabinet Single Drawer Keyed Lock installation. The assembly
process will be the same. The Lock Bar will be a different size depending on the number of drawers.
© 2015 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
2
TP200 Rev. A
003-2819-00
Step 7:
Install cam lock inside cabinet with lock bar spring
attached.
Step 5:
Install mullion onto cabinet with screws(3).
Step 6:
Assemble lock bar spring onto cam lock.
Step 4:
Remove cam lock and lock bezel and use hole punch and
hammer to start mounting holes.
Step 3:
Insert cam lock and lock bezel loosely into hole and
mark mounting holes as shown. Note: Make sure Lock
housing is parallel with mullion.
Step 2:
Measure from edge of mullion mark and drill 3/4” hole
through mullion.
Correct
Mullion
Lock Bar
Spring
Lock Bar
Spring
Lock
Bezel
Cam
Lock
Cam
Lock
Lock
Bezel
Mullion
CAB WIDTH
Lock Position
12” 4 - 25/32”
15”, 18”, 21” & 24” 4 - 7/8”
30” & 36” 5”
SEE CHART
Cam
Lock
Cam
Lock
© 2015 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
3
Step 10:
Inside cabinet install lock bar into slots as shown.
Note: Lock bars will vary but assembly process is
the same.
Step 9:
Install lock bar onto lock bar spring.
TP200 Rev. A
003-2819-00
Step 13:
Install drawer lock bracket(s) onto drawer with provided
screw(s). Re-install drawers and test lock. Note: Numbers of
bracket(s) and screw(s) will vary with number of drawers.
Step 11:
Secure lock bar bracket onto lock bar with screw provided.
Step 12:
Re-install slides (4) with screws (4).
Lock
Bezel
Lock
Plug
Lock Bar
Lock Bar
Spring
Step 8:
On outside of cabinet install lock bezel and lock plug.
Note: Cam should be in lock position as shown in
next step.
Slide
Screw
Screw
Lock Bar
Bracket
Lock Bar
Lock Bar
Drawer
Lock
Bracket
Slots
© 2015 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
4
TP200 Rev. A
003-2819-00 Rev. (2/18/16)
all
002-1903-xx Tall Cabinet Drawer Single Keyed
Lock Kit
(includes items 1 thru 10)
Item Description Qty.
1 • Lock Bar Bracket 1
2 • Screw (#10 -24 x 3/8”) 1
3 • Lock Bar Spring 1
4 • Screw (#6 x 5/8”) 2
5 Cam Lock 1
6 Lock Bezel 1
7 Lock Plug (See Chart) 1
8
RH Lock Bar
Contact Technical Service for Part Numbers
1
9 Drawer Lock Bracket - (1 per Drawer) AR
10 Screw (#10 x 5/8”) - (1 per Lock Bracket) AR
Serial Numbers / Dates:
all
050-9920-00-791 1
040-0010-109 2
025-0122-00 3
040-0006-71 4
016-0567-xx 7
016-0564-00 6
029-6576-00 5
050-9995-00-791 9
040-0010-48 10
Lock Plug Key Number
016-0567-00 100T
016-0567-01 101T
016-0567-02 102T
016-0567-03 103T
016-0567-04 104T
016-0567-05 105T
016-0567-08 106T
016-0567-09 107T
016-0567-10 108T
016-0567-11 109T
016-0567-12 110T
016-0567-13 111T
016-0567-14 112T
016-0567-15 113T
Lock Kit Used on:
002-1903-00 Tall Cabinet: 2 - 2” / 1 - 4” Drawers
002-1903-01 Tall Cabinet: 4 - 2” / 2 - 4” Drawers
002-1903-02 Tall Cabinet: All Drawers
8 a) 2-2” or 1-4” Drawer(s)
b) 4-2” or 2-4” Drawers
c) 36” (Cabinet Height)
d) 34” (Cabinet Height)
e) 30” (Cabinet Height)
© 2015 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Midmark Synthesis® Cabinetry Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI