Midmark Synthesis® Cabinetry - Side Cabinetry Installation guide

Brand: Midmark

Model: Synthesis® Cabinetry - Side Cabinetry

Type: Installation guide

This manual is also suitable for

TP200 Rev. A

003-2819-00 Rev. AA1 (1/16/20)

Contents:

Installation ...........1-3

Exploded View ........ 4

Special Tools:

none

Language of origin: English

Tall Cabinet Drawer Single Keyed

Lock Installation [002-1903-xx]

Step 1:

Remove drawers and slides as needed from cabinet.

Remove screws (3) from Mullion inside the cabinet to release.

Mullion

Screw

Slides

Note

This install can be used for any Tall Cabinet Single Drawer Keyed Lock installation. The assembly

process will be the same. The Lock Bar will be a different size depending on the number of drawers.

TP200 Rev. A

003-2819-00

Step 7:

Install cam lock inside cabinet with lock bar spring

attached.

Step 5:

Install mullion onto cabinet with screws(3).

Step 6:

Assemble lock bar spring onto cam lock.

Step 4:

Remove cam lock and lock bezel and use hole punch and

hammer to start mounting holes.

Step 3:

Insert cam lock and lock bezel loosely into hole and

mark mounting holes as shown. Note: Make sure Lock

housing is parallel with mullion.

Step 2:

Measure from edge of mullion mark and drill 3/4” hole

through mullion.

Correct

Mullion

Lock Bar

Spring

Lock Bar

Spring

Lock

Bezel

Cam

Lock

Cam

Lock

Bezel

Mullion

CAB WIDTH

Lock Position

12” 4 - 25/32”

15”, 18”, 21” & 24” 4 - 7/8”

30” & 36” 5”

SEE CHART

Cam

Lock

Cam

Lock

Step 10:

Inside cabinet install lock bar into slots as shown.

Note: Lock bars will vary but assembly process is

the same.

Step 9:

Install lock bar onto lock bar spring.

TP200 Rev. A

003-2819-00

Step 13:

Install drawer lock bracket(s) onto drawer with provided

screw(s). Re-install drawers and test lock. Note: Numbers of

bracket(s) and screw(s) will vary with number of drawers.

Step 11:

Secure lock bar bracket onto lock bar with screw provided.

Step 12:

Re-install slides (4) with screws (4).

Lock

Bezel

Lock

Plug

Lock Bar

Spring

Step 8:

On outside of cabinet install lock bezel and lock plug.

Note: Cam should be in lock position as shown in

next step.

Slide

Screw

Lock Bar

Bracket

Lock Bar

Drawer

Lock

Bracket

Slots

TP200 Rev. A

003-2819-00 Rev. (2/18/16)

all

002-1903-xx Tall Cabinet Drawer Single Keyed

Lock Kit

(includes items 1 thru 10)

Item Description Qty.

1 • Lock Bar Bracket 1

2 • Screw (#10 -24 x 3/8”) 1

3 • Lock Bar Spring 1

4 • Screw (#6 x 5/8”) 2

5 • Cam Lock 1

6 • Lock Bezel 1

7 • Lock Plug (See Chart) 1

• RH Lock Bar

Contact Technical Service for Part Numbers

9 • Drawer Lock Bracket - (1 per Drawer) AR

10 • Screw (#10 x 5/8”) - (1 per Lock Bracket) AR

Serial Numbers / Dates:

all

050-9920-00-791 1

040-0010-109 2

025-0122-00 3

040-0006-71 4

016-0567-xx 7

016-0564-00 6

029-6576-00 5

050-9995-00-791 9

040-0010-48 10

Lock Plug Key Number

016-0567-00 100T

016-0567-01 101T

016-0567-02 102T

016-0567-03 103T

016-0567-04 104T

016-0567-05 105T

016-0567-08 106T

016-0567-09 107T

016-0567-10 108T

016-0567-11 109T

016-0567-12 110T

016-0567-13 111T

016-0567-14 112T

016-0567-15 113T

Lock Kit Used on:

002-1903-00 Tall Cabinet: 2 - 2” / 1 - 4” Drawers

002-1903-01 Tall Cabinet: 4 - 2” / 2 - 4” Drawers

002-1903-02 Tall Cabinet: All Drawers

8 a) 2-2” or 1-4” Drawer(s)

b) 4-2” or 2-4” Drawers

c) 36” (Cabinet Height)

d) 34” (Cabinet Height)

e) 30” (Cabinet Height)

Midmark Synthesis® Cabinetry - Side Cabinetry Installation guide

Brand: Midmark

Model: Synthesis® Cabinetry - Side Cabinetry

Type: Installation guide

This manual is also suitable for

Download PDF

report

Midmark Synthesis® Cabinetry - Side Cabinetry Installation guide

This manual is also suitable for

Midmark Synthesis® Cabinetry - Side Cabinetry Installation guide

Related papers

Other documents