KC HiLiTES 4230 KC Installation guide

Thanks for choosing a KC HiLiTES product. We take pride in building the highest quality, best engineered

systems possible. Your satisfaction with our product is important, so if you have any questions, please call

our customer service line at 800-528-0950.

Tools Needed:

* Phillips Screwdriver

Installing the KC Replacement TJ Headlight:

1. Remove the three Phillips screws from the headlight bezel. Grab the bezel and remove it from around the

headlight.

2. Remove the four Phillips screws from the headlight retaining ring. Remove the retaining ring away to access

the headlight.

3. Hold the headlight and pull it toward you. On the back of the headlight, you will find an electrical plug; unplug it

from the headlight.

4. Connect the electrical plug onto the back of the H-4 Bulb in your new KC Replacement Headlight. Insert the

headlight back into its mount (hold it place). Position the retaining ring around the headlight and install the four

Phillips screws to secure it.

5. Reattach the headlight bezel around the headlight and install the three Phillips screws to finish.

6. Your DONE! ---- enjoy.

Installation Instructions for

Replacement TJ Headlight

#4230/42301

KC HiLiTES, Inc. 2843 W. Avenida de Luces, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.com KC031411R

IF YOU HAVE ANY PROBLEMS

OR QUESTIONS, PLEASE CALL

CUSTOMER SERVICE AT 800-528-0950

See details on our website at

www.kchilites.com

23 Year Warranty

Download PDF