Angelo Decor AD95203 Operating instructions

Thank you for buying an Angelo Decor Fountain!

We hope

ou will find these instructions helpful in settin

our fountain. If

ou need more

information to properl

care for

our fountain, please DO NOT return the unit to place of purchase.

Please visit our web site, www.an

elodecor.com, for assistance and warrant

information.

First unpack carton carefully, arranging parts safely in your working area.

Pump comes pre-installed Cord through pedestal. Align cord with groove "Twist and lock" bowl

with cord seal. Check to see of base to pedestal.

the cord seal is tight.

Adjust pump to desired Connect tubing to Tigth both srews provided Set top riser into place

setting. the pump. into place

Insert PVC pipe into Conect tulbing to output Slide the top ball into place

top riser. of top ball.

The final assembly should

look like this

Now simply fill with clean water and plug into a grounded GFCI outlet

We recommend keeping bowl 3/4 full of water to avoid pump burnout.