Angelo Decor AD93638 Operating instructions

Brand: Angelo Decor

Model: AD93638

Type: Operating instructions

Thank you for buying an Angelo Decor Fountain!

We hope you will find these instructions helpful in setting up your fountain.

If you have any issues with this item, please DO NOT return the unit to place of purchase.

Please visit our web site, www.angelodecor.com, for assistance and warranty information.

First unpack carton carefully, arranging parts safely in your working area.

Now sim

fill with clean water and

into a

rounded GFCI outle

We recommend kee

bowl 3/4 full of water to avoid

burnout.

Cord through

standpipe Insert cord through pedestal.

Align with groove in the base. Twist and lock the bowl

to the pedestal.

Twist and lock the

riser to the bowl Insert the "slip fit" into riser and

then set the 2nd bowl into place

Connect the tubing to the

pump, be sure it sits flat

inside the housing without

any kink in the hose.

Pump is preset to full,

adjust lower if less

splash is desired.

Connect the tubing to top feature.

Insert tubing through the 2nd bowl

and through to pump housing.

Install the pump access

door. This feature makes it

easier for you to clean and

adjust your pump.

The final assembly

should look like this

This fountain comes

complete with our

innovative splash

reduction system. If

splash is a concern,

simply drape the splash

line over each spill point

to dramatically reduce

splash.

Angelo Decor AD93638 Operating instructions

Angelo Decor AD93638 Operating instructions

Angelo Decor AD93638 Operating instructions

Related papers

Other documents