Makita HR5211C User manual

Makita
Brand
Makita
Model
HR5211C
Category
Rotary hammers
Type
User manual

Makita HR5211C is a professional-grade rotary hammer with SDS-Max shank, designed for heavy-duty drilling and chipping applications in concrete and masonry. It features a powerful 1,500W motor, electronic speed control for precise operation, and a soft start function to reduce starting shock. The HR5211C also boasts an active dynamic vibration absorber and vibration-absorbing grip to minimize user fatigue during prolonged use. With its durable construction and range of advanced features, the Makita HR5211C is an ideal tool for demanding construction and renovation tasks.

Makita HR5211C is a professional-grade rotary hammer with SDS-Max shank, designed for heavy-duty drilling and chipping applications in concrete and masonry. It features a powerful 1,500W motor, electronic speed control for precise operation, and a soft start function to reduce starting shock. The HR5211C also boasts an active dynamic vibration absorber and vibration-absorbing grip to minimize user fatigue during prolonged use. With its durable construction and range of advanced features, the Makita HR5211C is an ideal tool for demanding construction and renovation tasks.

52mm
52mm
Learned from the Mother Earth
Comparison of Efficiency
Electronic Control
Note:
1. It may differ under some conditions.
2. Numbers in the charts below are relative values
when the capacities of Competitor "B"
are indexed at 100.
Drilling
1
Test conditions:
Drilled in concrete with compressive strength of 40N/mm
2
.
Bit diameter: 25mm
80 100 120 140
fastslow
Makita HR5211C
Competitor "B"
125
125
Competitor "H"
85
85
Competitor "D"
Makita HR5211C
Competitor "B"
Competitor "H"
Competitor "D"
115
115
100
100
0
Bit diameter: 40mm
80 100 120 140
fastslow
Makita HR5211C
Competitor "B"
125
125
Competitor "H"
60
60
Competitor "D"
110
110
100
100
0
80 100 120 140
115
115
80
80
85
85
100
100
0
largesmall
Chipping
2
Test conditions:
Chipped concrete with compressive strength of 40N/mm
2
.
The constant speed control keeps minimizing the
speed loss under loaded conditions and enables
highly efficient operation.
The soft starter suppresses the rotation speed for
seconds at startup to reduce the starting shock.
Satisfy Professional's Needs
HR5211C/ HR5210C/ HR5201C 52mm (2")
Rotary Hammer
SDS-Max Shank
Items of standard equipment and specifications may differ by country or area.
PRINTED IN JAPAN Z15214-2 2007-05
Makita Corporation
3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan
Rotary Hammer
HR5211C / HR5210C / HR5201C
52mm (2")
171
Continuous rating Input
Max. bit dia.
Max. core bit dia.
Impacts per minute
No load speed
Dimensions
(L x W x H)
Net weight
Power supply cord
HR5211C
1,500W
52mm (2")
160mm (6-1/4")
1,075-2,150ipm
130-260rpm
599mm x 149mm x 287mm
(23-1/2" x 5-7/8" x 11-1/4")
11.6kg (25.6lbs)
5.0m (16.4ft)
HR5210C
1,500W
52mm (2")
160mm (6-1/4")
1,075-2,150ipm
130-260rpm
599mm x 149mm x 287mm
(23-1/2" x 5-7/8" x 11-1/4")
11.6kg (25.6lbs)
5.0m (16.4ft)
HR5201C
1,500W
52mm (2")
160mm (6-1/4")
1,075-2,150ipm
130-260rpm
599mm x 130mm x 287mm
(23-1/2" x 5-1/8" x 11-1/4")
10.8kg (23.8lbs)
5.0m (16.4ft)
Standard Equipment
Depth Gauge, Side Handle (D), Side Handle (Bar), Bit Grease, Cleaning Cloth (Tool does not come with bit)
Double Insulation
Variable Speed
Electronic Speed Control
Soft Start
Torque Limiter
Carrying Case
Principle of
Dynamic Vibration Absorber
Reinforcing bar
Reinforcing bar
Reinforcing bar
Piston
Striker
Sleeve
Air
Striker
Piston
How to generate POWER
How to manage VIBRATION
How to bring you COMFORT
THE MOTHER EARTH SOMETIMES QUAKES.
85
mm
Time to reach ELV
Rubberized Grip
:: For comfort
Slide Chuck
:: Push-in and Go
:: Slide-back and Pull
Name Plate
:: Located on
low damage risk area
LED
:: Green :Electrified
::
Red :Replacement of carbon brush
Dial
:: Variable speed control
No Hammering
while Idling
:: Ensures machine's long life
Torque Limiter
:: When drill bit hits against
reinforcements,
Torque Limiter operates
to stop
Longer life of
Carbon brushes
:: features twice as long as
that of Predecessor model
by employing large carbon brush.
Mode Change Lever
:: Located on
low damage risk area
:: Protected by
robust aluminum top
Long Barrel Portion
:: can be securely held by hand
Long Barrel Portion
:: can be securely held by hand
16 Angle Settings
of Chisel bit
HR5211C
HR5210C
HR5201C
/// Active Dynamic Vibration Absorber
/// Active Dynamic Vibration Absorber
/// Vibration Absorbing Grip
Lear
Lear
ned
ned
fr
fr
om
om
the
the
Mother Earth
Mother Earth
Learned from
the
Mother Earth
MAKITA's
"Active" Dynamic
Vibration Absorber
(HR5211C and HR5210C)
Extremely Comfortable
Easy and Very Comfortable
Easy and Comfortable
Easier to manage the exposure of vibration to body.
Easy operating Slide Lock-on Switch for hammering.
Easiest to manage the exposure of vibration to hands and arms.
Slide Lock-on switch leaves operators' fingers out of effort
to keep pulling trigger for long hours when
hammering
.
Selectable Switches
Hammering
Hammering
Hammering
with Rotation
Hammering
with Rotation
Vibration Absorbing Grip
(HR5211C only)
Spring
Hinge
Piston
Balancer
Air
Piston
Balancer
Air
AirAir
Slide lock-on switch
for Hammering
Trigger switch for
Hammering and
Hammering with Rotation
Tool does not
come with bit
Tool does not
come with bit
Tool does not
come with bit
Shift of air pressure in crank room
and barrel room "actively"
controls balancer to move
opposite of piston.
Spring loaded
hinged grip absorbs vibration
Auto Cut-Out Carbon Brush
:: protects commutator and
indicates time for maintenance
20m/s
2
25m/s
2
15m/s
2
60min
77min
42min
32min
26min
29min
30min
10
m/s
2
12.5m/s
2
HR5211C
HR5210C
HR5201C
Competitor "B"
HR5001C
Comparison of Vibration level* and Time to reach ELV (Exposure Limit of Vibration)**
*It is known as the tri-axial value and value at Directive of A(8).
**It means the maximum amount of vibration that an operator may be exposed to on any single day.
Vibration level
See the Result of AVT
17.0m/s
2
19.5m/s
2
21.5m/s
2
20.5m/s
2
  • Page 1 1
  • Page 2 2

Makita HR5211C User manual

Makita
Brand
Makita
Model
HR5211C
Category
Rotary hammers
Type
User manual

Makita HR5211C is a professional-grade rotary hammer with SDS-Max shank, designed for heavy-duty drilling and chipping applications in concrete and masonry. It features a powerful 1,500W motor, electronic speed control for precise operation, and a soft start function to reduce starting shock. The HR5211C also boasts an active dynamic vibration absorber and vibration-absorbing grip to minimize user fatigue during prolonged use. With its durable construction and range of advanced features, the Makita HR5211C is an ideal tool for demanding construction and renovation tasks.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents