Page is loading ...
Product Specification of Hammer Drill Bits
Set & Chisels- 17Pcs
☆Brand: COMOWARE
☆Product Name: Hammer Drill Bits Set & Chisels -17Pcs
☆Product Picture: ☆Packaging Picture:
☆Features:
Compared with percussion drills, electric hammer drills can generate stronger impact
force lightly and reduce bit stress, keep the bit running cooler, and for fast dust removal,
allowing for effective and precise drilling. Before using the hammer drill, you can use
a chisel to make a point of strength, and then combine the hammer drill to meet your
processing needs. It is featured in a harder YG8 Carbide tip and carbide steel body. The
robust head is ideal for high impact applications. It allows for precise starts in materials
such as reinforced concrete.
☆Material: Carbon Steel
☆Surface Treatment: Sand Blasted
☆Tip: YG8 Carbide Tip
☆Set Listing: 13* Hammer Drill Bits, 1*Point Chisel, 2* Flat Chisel, 1* U-shaped
Chisel
☆Size Included:
SDS Plus Hammer Drill Bit: 5.5 x 110mm, 6 x 110mm, 5.5 x 160mm, 6 x 160mm,
6.5 x 160mm, 7 x 160mm, 8 x 160mm, 2* 10 x 160mm, 14 x 210mm, 10 x 260mm,
12 x 260mm, 16 x 260mm
Flat Chisel: 14 x 250 x 20mm, 14 x 250 x 40mm
Point Chisel: 14 x 250mm
U-shaped Chisel: 14 x 250mm
☆Advantage:
The SDS - PLUS shank is suitable for most rotary hammer drills on the market
and meets most of your needs. SDS chisel matches the electric hammer drill to punch
hole for concrete, brick and wall, cut and chisel groove.
☆Product Detail:
☆Use Guide:
When drilling, keep the bit perpendicular to the processed object to avoid
damaging the bit and yourself.
☆This Drill Bit Set comes in 17 different sizes to meet your needs. The specific
parameters are as follows:
✔ Higher Hardness: High Carbon Steel Body
✔ Higher Performance: YG8 Carbide Tip
✔ Multiple Application: The SDS - PLUS shank is suitable for most rotary hammer
drills on the market and meets most of your needs.
✔ Organized Holders: Come with a plastic index case, convenient to use and carry.
☆Certificates
/
