makitatools.com
LESS VIBRATION
1
”
AVT
®
Rotary Hammer,
accepts SDS-PLUS bits
Model HR2611F
Recessed hammer function selector
located below gear housing
DURABILITY
L.E.D. light illuminates drilling
surface for more productivity
CONVENIENCE
Integrated damper spring is
engineered to absorb impact
vibrations from the drill bit
PRODUCTIVITY
Anti-Vibration Technology is an
internal counterbalance system
that greatly reduces vibration
COMFORT
POWERFUL 7 AMP MOTOR DELIVERS 2.1 FT.LBS. OF IMPACT ENERGY
TO HANDLE THE MOST DEMANDING APPLICATIONS
• Anti-VibrationTechnology(AVT®)isaninternalcounterbalancesystem
thatgreatlyreducesvibrationbymovingacounterweightinthe
oppositedirectionofdrivepiston
• Integrateddamperspringatthebaseoftheimpactboltisengineered
toabsorbimpactvibrationsfromthedrillbit
• L.E.D.lightilluminatesdrillingsurfaceformoreproductivity
inlowlightapplications
• Recessedhammerfunctionselectorlocatedbelowgearhousing
forimproveddurability
Makita U.S.A., 14930 Northam St., La Mirada, CA 90638
makitatools.com
1
”
AVT
®
Rotary Hammer, accepts SDS-PLUS bits
Model HR2611F
FEATURES & BENEFITS
STANDARD EQUIPMENT
SPECIFICATIONS
Makita offers a wide variety of accessories. For a complete listing,
please refer to the Makita General Catalog or visit our website at
makitatools.com, or call 1-800-4MAKITA.
All specifications subject to change without prior notice. All models and accessories subject to stock on hand.
The Makita Teal Color is the trade dress of Makita Corporation and is protected under common law and registered with the U.S. Patent and Trademark Office
NTF-0713 MA-2420-13
Model HR2611F
n Powerful 7 AMP motor delivers 2.1 ft.lbs. of impact energy
to handle the most demanding applications
n Anti-Vibration Technology (AVT®) is an internal
counterbalance system that greatly reduces vibration
by moving a counterweight in the opposite direction
of drive piston
n Integrated damper spring at the base of the impact bolt is
engineered to absorb impact vibrations from the drill bit
n L.E.D. light illuminates drilling surface for more
productivity in low light applications
n Recessed hammer function selector located below
gear housing for improved durability
n Sequential impact timing delivers timed hammering
during rotation to minimize overlapping bit impacts
for up to 50% faster drilling
n Variable speed trigger enables user to match the speed
to the application for greater versatility
n 3-mode operation for “Rotation Only”, “Hammering with
Rotation” or “Chipping Only” for multiple applications
n 40 bit angle settings allow the bit to be set at different
positions for operating convenience
n Ergonomic “Pistol-grip” handle with rubberized
soft grip for increased comfort
n Torque limiting clutch engineered to prevent gear
damage by automatically disengaging gears if
the bit binds
n “No hammering when idling” function helps
increase tool life
n Side Handle
n Depth Rod
n Case
AMPS 7
Impact Energy (Joules) 2.9 J
Blows Per Minute (variable speed) 0 - 4,600 BPM
No Load Speed (variable speed) 0 - 1,200 RPM
Capacity (steel) 1/2”
Capacity (concrete) 1”
Capacity (wood) 1-1/4”
Bit Type Accepts SDS-PLUS
Overall Length 15-1/8”
Cord Length (ft) 13.1’
Net Weight 6.6 lbs.
Shipping Weight 11.7 lbs.
Vibration (m/s²) 11.5
Sound Rating (decibels) 90 dB(A)
UPC Code 088381606745
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Makita HR4013C Specification
-
-
-
-
-
Makita HM1317CB Specification
-
-
-
-
Other documents
-
Greenheck 469420 BR Series – Counterweight Adjustment Operating instructions
-
Hitachi DS18DVB2 User manual
-
Hitachi DH 40MRY Technical Data And Service Manual
-
-
-
-
-
-
-