WEG SSW-08 User guide

Type
User guide

This manual is also suitable for

IP20 Kit
Kit IP20
SSW-07 / SSW-08
Installation Guide
Guia de Instalación
Guia de Instalação
English / Español / Português
Motors | Automation | Energy | Transmission & Distribution | Coatings
3
SUMMARY
1. DESCRIPTION OF THE KIT .........................................................................5
2. SAFETY NOTICES ......................................................................................5
3. OPTIONAL MODULE DESCRIPTION .......................................................5
4. IP20 KIT INSTALLATION PROCEDURE .....................................................5
ÍNDICE
1. DESCRIPCIÓN DEL KIT .............................................................................7
2. INFORMACIONES DE SEGURIDAD .........................................................7
3. DESCRIPCIÓN DEL OPCIONAL ..............................................................7
4. PROCEDIMIENTO PARA LA INSTALACIÓN DEL KIT IP20 .......................7
ÍNDICE
1. DESCRIÇÃO DO KIT ................................................................................9
2. INFORMAÇÕES DE SEGURANÇA ..........................................................9
3. DESCRIÇÃO DO OPCIONAL .................................................................9
4. PROCEDIMENTO PARA INSTALAÇÃO DO KIT IP20 ...............................9
5
Table 1 - Contents of the Kit
1. DESCRIPTION OF THE KIT
2. SAFETY NOTICES
DANGER!
Disconnect the supply of the Soft-Starter SSW-07/SSW-08 before installing
the IP20 kit.
3. OPTIONAL MODULE DESCRIPTION
This optional module has the function to protect against contact to energized
parts.
The IP20 Kit is connected directly to the SSW-07/SSW-08. The module is xed
close to the power terminals, both at the line input and at output to the motor.
4. IP20 KIT INSTALLATION PROCEDURE
1. Contents of the kit. 2. Fix the bottom cover at the holes
located on both sides of the power
terminals.
ENGLISH
SSW-07/SSW-08 IP20 Kit
Quantity Description Size 3 Size 4
1 IP20 optional module
10413866 11059230
1 Installation guide
6
4. Press it down until it ts into the bottom
cover.
3. First x the second support on the upper
side.
5. Verify if the supports are connected.
6. To connect the supports of the power
supply, repeat the same sequence.
ENGLISH
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

WEG SSW-08 User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages