SSW-07

WEG SSW-07, SSW-08, SSW07/SSW08 User guide

  • Hello! I am an AI chatbot trained to assist you with the WEG SSW-07 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the purpose of an IP20 kit for WEG SSW-07?
    What components are included in the IP20 kit?
    What is the installation procedure for the IP20 kit?
    What safety precautions should be taken when installing the IP20 kit?
    Where should the IP20 module be located within the SSW-07/SSW-08?
IP20 Kit
Kit IP20
SSW-07 / SSW-08
Installation Guide
Guia de Instalación
Guia de Instalação
English / Español / Português
Motors | Automation | Energy | Transmission & Distribution | Coatings
3
SUMMARY
1. DESCRIPTION OF THE KIT .........................................................................5
2. SAFETY NOTICES ......................................................................................5
3. OPTIONAL MODULE DESCRIPTION .......................................................5
4. IP20 KIT INSTALLATION PROCEDURE .....................................................5
ÍNDICE
1. DESCRIPCIÓN DEL KIT .............................................................................7
2. INFORMACIONES DE SEGURIDAD .........................................................7
3. DESCRIPCIÓN DEL OPCIONAL ..............................................................7
4. PROCEDIMIENTO PARA LA INSTALACIÓN DEL KIT IP20 .......................7
ÍNDICE
1. DESCRIÇÃO DO KIT ................................................................................9
2. INFORMAÇÕES DE SEGURANÇA ..........................................................9
3. DESCRIÇÃO DO OPCIONAL .................................................................9
4. PROCEDIMENTO PARA INSTALAÇÃO DO KIT IP20 ...............................9
5
Table 1 - Contents of the Kit
1. DESCRIPTION OF THE KIT
2. SAFETY NOTICES
DANGER!
Disconnect the supply of the Soft-Starter SSW-07/SSW-08 before installing
the IP20 kit.
3. OPTIONAL MODULE DESCRIPTION
This optional module has the function to protect against contact to energized
parts.
The IP20 Kit is connected directly to the SSW-07/SSW-08. The module is xed
close to the power terminals, both at the line input and at output to the motor.
4. IP20 KIT INSTALLATION PROCEDURE
1. Contents of the kit. 2. Fix the bottom cover at the holes
located on both sides of the power
terminals.
ENGLISH
SSW-07/SSW-08 IP20 Kit
Quantity Description Size 3 Size 4
1 IP20 optional module
10413866 11059230
1 Installation guide
6
4. Press it down until it ts into the bottom
cover.
3. First x the second support on the upper
side.
5. Verify if the supports are connected.
6. To connect the supports of the power
supply, repeat the same sequence.
ENGLISH
/