Ops-Core Skeleton One Hole Shroud Operating instructions

Brand: Ops-Core

Model: Skeleton One Hole Shroud

Type: Operating instructions

COLORFEATURES

TAN

GREEN

BLACK

UM-1003 REV. B

FITS STANDARD

NVG MOUNTS

•

Weighs 65 grams

/- 3%

)

•

Lightweight Material

•

Low Prole

•

Snag-Free Design

Fits ACH style and other one-hole conguration helmets

Patent Pending

INSTALLATION INSTRUCTIONS

Skeleton One-Hole Shroud is compatible with ACH style and other one-hole conguration helmets.

Hardware Included: 1 screw, 1 t-nut

STEP 1: ATTACH SHROUD TO HELMET

Align the Skeleton One-Hole Shroud with the existing one-hole pattern on the

front of your helmet. Insert the screw through the shroud from the front (outside)

of the helmet shell and attach the t-nut from the inside of the helmet shell.

Finish by using a screwdriver to tighten the screw, making sure the Skeleton

One-Hole Shroud is securely fastened to the helmet.

WARNING: DO NOT OVER-TIGHTEN SCREW

When tightening the screw, do not exceed 16 inch-pounds of torque to avoid

damaging your helmet shell.

STEP 2: ATTACH NVG MOUNTING ARM

Insert and anchor the top of the NVG Mounting Arm underneath the top of the

bracket as shown. While pressing the arm’s release trigger, push down to snap

and lock the arm in place.

STEP 3: TEST MOUNT TO ENSURE

SECURE ATTACHMENT

Before attaching any NVGs to the mount, give the mount a sturdy

tug in all directions to ensure it is properly secured.

OPS-CORE INC.

Marine Industrial Park

12 Channel Street

Boston, MA 02210

Tel: 617.670.3547

Fax: 617.670.3581

Or visit our website

at www.ops-core.com

SKELETON ONE-HOLE SHROUD

Ops-Core Skeleton One Hole Shroud Operating instructions

Ops-Core Skeleton One Hole Shroud Operating instructions

Ops-Core Skeleton One Hole Shroud Operating instructions

Related papers

Other documents