CLEANING AND CARE
1. Spot-clean with a mild detergent and water.
2. Visually check for signs of wear and breakage.
3. Clean dust and dirt by using air pressure.
4. Ensure that the Cam-Loc handles function properly.
NOTE: IF ANY DEFECTS ARE FOUND, THE DAMAGED COMPONENTS SHOULD BE REPLACED BEFORE USE.
MAINTENANCE
FOR FAST HIGH CUT HELMETS
© OPS-CORE 2016 UM-1006 REV. A
FAST VISOR
OPERATOR’S MANUAL
1
RELOCATE NVG BUNGEES
Before the FAST Visor can be properly installed,
any existing NVG bungees cannot be anchored to
the bottom of the shroud. If your helmet has NVG
bungees, relocate them to a point at the top of the
shroud as shown.
2
OPEN CAM-LOC HANDLES
Rotate both Cam-Loc Handles to the open position
as shown.
3
INSERT CONNECTOR SHOES
Align and insert the visor’s ARC Rail Connector Shoes
into the ARC Rails of your FAST Helmet until the visor
is ush with the front edge of the helmet.
4
FASTEN CAM-LOC HANDLES
Fasten both the left and right Cam-Loc Handles to
secure the FAST Visor in place.
5
CONFIRM FIT
Check the stability of the visor. Ensure that the visor
is immovable and centered. Readjust if necessary.
Multiple Vented Positions
INTRODUCTION INSTALLATION PROCEDURE
FAST VISOR KIT INCLUDES:
(1) FAST Visor
ABOUT YOUR VISOR:
This manual covers the installation and basic operating
instructions for the Ops-Core FAST Visor. The Ops-Core
FAST Visor provides additional eye and face protection
from ballistic threats for the Ops-Core FAST helmet.
The FAST Visor quickly attaches to the FAST Helmet without the use of tools.
Cam-Loc Handle
Ballistic Lens
ARC Rail
Connector Shoe
FEATURES
• Designed for use in conjunction with APEL ballistic eyewear and goggles
• Whisper-quiet pivot hinge locks visor into closed, vented, or open position
• Tool-less installation and removal
• Easy one-handed donning and dofng
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ops-Core ACH Visor Operating instructions
-
-
-
-
-
Ops-Core FAST SF Super High Cut Helmet Operating instructions
-
-
-
-
Other documents
-
AOR AR8200MK3-IR User manual
-
Gentex TBH-IIIA Mission Configured Helmet System Operating instructions
-
Gentex Active Shooter Helmet Kit Operating instructions
-
Novus NVG-002LIB User manual
-
3M Ultra Light Weight Ballistic Bump Helmet N49 Operating instructions
-
Gentex HGU-84/P Operating instructions
-
Gentex HGU-55/P Operating instructions
-
Gentex SPH-4B Assembly
-
Alpha 900 Search and Rescue Rotary Wing Helmet System User guide
-
Giro Helmet Owner's manual
