Unbranded BMS12070W Installation guide

Brand: Unbranded

Model: BMS12070W

Type: Installation guide

Sliding Door Installation Guide.

Thank you for your purchase.

Pencil Measuring Tape

Phillip’s

Screwdriver

Drill 3/16 Bit

TOOLS REQUIRED

Pre-drilled holes in track fasten

with screws provided

Sliding Door threshold

Set threshold track

5/8” from front edge

of frame.

Floor

Install top track

even with jamb.

Header

Trim

SIDE VIEW

DONE! WASN’T THAT EASY?

STEP 1

Install top reversible track first

using screws provided.

1 1/4”phillip’s

head screws

provided

STEP 2

Install bottom threshold track 5/8”

from front edge of frame.

5/8”

1/4”phillip’s

head screws

provided

STEP 4

Now if required, you can make adjustments

in height on bottom rollers using a screw

driver.

Back Side View

Adjustment

screw

STEP 3

Now you are all set to install the doors

between the top & bottom tracks.

1

Unbranded BMS12070W Installation guide

Brand: Unbranded

Model: BMS12070W

Type: Installation guide

Download PDF

Related papers

Other documents