Features
•
Compression molded from Sterling’s exclusive solid
Vikrell
®
material
•
Convenient shelving and acrylic towel bar on back
wall
•
Modular 4-piece design
•
Lightly pebbled bottom surface for sure footing
•
Tongue-and-groove ″snap together″ design
•
Durable swirl gloss finish
•
10 year consumer/3 year commercial limited warranty
•
Caulk required for installation
•
Allows for future attachment of grab bars
•
60″ (152.4 cm) x 31-1/2″ (80 cm) x 74″ (188 cm)
complete unit rough-in dimensions include flange
•
60″ (152.4 cm) x 30″ (76.2 cm) x 72-3/4″ (184.8 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ASTM E84
•
ANSI Z124.1.2
•
IAPMO/UPC
•
HUD, UM Bulletin 73A
•
NAHB Research Foundation, Inc.
60″ (152.4 cm) BATH/SHOWER
SYSTEM WITH BACKER BOARDS
61040116
ALSO 61040126, 61040516, 61040526
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
61040116 60″ (152.4 cm) bath and wall surround with backer boards, left drain ❑ 0 ❑ Other_____
61040126 60″ (152.4 cm) bath and wall surround with backer boards, right drain ❑ 0 ❑ Other_____
Model Wall Component Description Colors/Finishes
61044106 Complete wall set with backer boards ❑ 0 ❑ Other_____
ALL PRO
®
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1065811-4-
A
Technical Information
Fixture:*
Bathing
well
basin area 40″ (101.6 cm) x 21″ (53.3 cm)
top area 52″ (132.1 cm) x 29″ (73.7 cm)
To
overflow
water depth 9-3/8″ (23.8 cm)
capacity 44 gal (166.6 L)
* Approximate measurements for comparison only.
Maximum door width 57-1/2″ (146.5 cm)*
Maximum door height NA*
* Varies with alternative walls.
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
45"
(114.3 cm)
21"
(53.3 cm)
3-1/2" (8.9 cm)
2" (5.1 cm)
1"
(2.5 cm)
1"
(2.5 cm)
1"
(2.5 cm)
10"
(25.4 cm)
10"
(25.4 cm)
1" (2.5 cm)
42"
(106.7 cm)
Grab Bar
24"
(61 cm)
Grab Bar
Back Wall
End Wall
Backer board locations
Note: Right and left end walls
are the same, only mirrored.
42"
(106.7 cm)
Grab Bar
Dimensions are taken from
the center of the grout lines.
31-1/2"
(80 cm)
39"
(99.1 cm)
2-5/8"
(6.7 cm)
59"
(149.9 cm)
60"
(152.4 cm)
74"
(188 cm)
1-1/2" (3.8 cm)
15" (38.1 cm)
15-1/2" (39.4 cm)
2-1/2"
(6.4 cm)
2-7/8" (7.3 cm)
3-1/2" (8.9 cm)
30" (76.2 cm)
1-5/8" (4.1 cm)
1-1/4" (3.2 cm)
31-1/2"
(80 cm)
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
4" (10.2 cm)
7-3/4"
(19.7 cm)
2" (5.1 cm)
D. Drain
14"
(35.6 cm)
8"
(20.3 cm)
14"
(35.6 cm)
14"
(35.6 cm)
6-1/2"
(16.5 cm)
16" (40.6 cm)
30" (76.2 cm)
Drain Cutout
3-1/2"
(8.9 cm)
22" (55.9 cm)
Product Diagram
ALL PRO
®
ALL PRO
®
60″ (152.4 cm) BATH/SHOWER SYSTEM WITH BACKER BOARDS
Page2of2
1065811-4-
A
/