2. Nortec
  3. LINKS Series

Nortec LINKS Series Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Nortec LINKS Series Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
For Building Automation Systems:
LonWorks
Quick Start Guide
LINKS for LonWorks
Requirements
Laptop
CAT5 Ethernet Cable
Commissioning the LINKS card on a LonWorks Network
1. The LonWorks Administrator will prompt when to hit the Service Pin on the LINKS card at the
correct step of the Commissioning process which is different for each LonWorks Network
Management Tool.
Instructions to Download XIF File
1. Connect a CAT5 Ethernet cable (Straight through or Cross-Over) between the PC and
ProtoCarrier.
2. The Default IP Address of ProtoCarrier is 192.168.168.24, Subnet Mask is 255.255.255.0. If
the PC and ProtoCarrier are on different IP Networks, assign a static IP Address to the PC on the
192.168.1.xxx network.
For Windows XP
Go to > >
Right-click on Local Area Connection > Properties
Highlight >
For Windows 7
Go to > > > >
Configuration
Right-click on Local Area Connection > Properties
Highlight >
3. For Windows XP and Windows 7, use the following IP Address:
4. Click twice.
5. Open a web browser and go to the following address: [IP Address of ProtoCarrier]/fserver.xif
Example: 192.168.168.24/fserver.xif
If the web browser prompts to save the file, save the file onto the PC. If the web browser
displays the xif file as a web page, save the file onto the local PC as “fserver.xif”
Configuration
All information contained in this Quick Start Guide is for
general information purposes only. For complete Nortec
installation/operation recommendations for your Nortec
equipment, please refer to the installation manual for your
specific system, accessories, and components.
All electrical connections must be installed in accordance
with local and national electrical code requirements by a
licensed electrician.
All water supply and drain line connections must be
installed in accordance with local plumbing codes by a
licensed plumber.
Nortec does not accept any liability for installations of
humidity equipment installed by unqualified personnel
or the use of parts/components/equipment that are not
authorized or approved by Nortec.
USA 826 Proctor Avenue, Ogdensburg, NY 13669
Canada 2740 Fenton Road, Ottawa, Ontario K1T 3T7
1.866.NORTEC1
[email protected]
Member of the Condair Group
Printed in Canada 2589565-A
/