CleanStation™ CSIIP Installation Guide
DOC-03204 Rev. B 12
3.4 Attaching a Plug to the Power Cable (for 220 V Units)
It is the customer’s responsibility to ensure that the power connector is prepared by personnel
qualified by local authorities.
TheCleanStation™CSIIPunitisshippedwithoneofthefollowing:
• for 90-120 VAC:apowercable,includingaNEMA5-15(TypeB)plug
suitablefortheUSA.Forregionswiththisvoltagethatuseadifferenttypeof
plug,thecustomermustprovideaplugthatmeetslocalrequirementsand
haveitinstalledbypersonnelqualifiedbylocalauthorities.
• for 220-240 VAC:a14AWGpowercable,withnoplugattached.Forthese
areas,thecustomermustprovideaplugthatmeetslocalrequirementsand
haveitinstalledbypersonnelqualifiedbylocalauthorities.
Ifnecessary,attachthepowerplugrequiredbylocalauthorities.
Figure 11 Schematic diagram of 220 V power cable