Kichler Lighting 52079PAL User manual

52079PAL
Brand
Kichler Lighting
Model
52079PAL
Type
User manual

Kichler Lighting 52079PAL is a stylish and versatile light fixture that can be used to enhance the ambiance of any room. With its adjustable height and multiple arms, it provides ample lighting for a variety of tasks. The fixture is easy to install and comes with all the necessary hardware. It is also backed by a one-year warranty, so you can be sure that it will last for years to come. Whether you're looking to add a touch of elegance to your living room or create a more inviting atmosphere in your bedroom, the Kichler Lighting 52079PAL is a great choice.

Kichler Lighting 52079PAL is a stylish and versatile light fixture that can be used to enhance the ambiance of any room. With its adjustable height and multiple arms, it provides ample lighting for a variety of tasks. The fixture is easy to install and comes with all the necessary hardware. It is also backed by a one-year warranty, so you can be sure that it will last for years to come. Whether you're looking to add a touch of elegance to your living room or create a more inviting atmosphere in your bedroom, the Kichler Lighting 52079PAL is a great choice.

IS-52079-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
8) Take threaded pipe[A] from parts bag and screw in screw collar loop[B] a
minimum of 6 mm (1/4”). Lock into place with hexnut[C].
9) Run another hexnut down threaded pipe almost touching rst hexnut.
Now screw threaded pipe into mounng strap[D]. Mounng strap must be
posioned with extruded thread faced into outlet box[E]. Threaded pipe
must protrude out the back of mounng strap. Screw third hexnut onto end
of threaded pipe protruding from back of mounng strap.
10) Connect mounng strap[D] to outlet box using the strap mounng screws[J].
11) Unscrew the threaded ring[F] from screw collar loop. Take canopy[G] and pass
over screw collar loop. Approximately one half of the screw collar loop exterior
threads should be exposed. Adjust screw collar loop by turning assembly up or
down in mounng strap. Remove canopy.
12) Aer desired posion is found, ghten both top and boom hexnuts up
against the boom and top of the mounng strap.
13) Slip canopy over screw collar loop and thread on threaded ring. Aach open
locking chain link[H] (with xture connected) to boom of screw collar loop.
Close the open chain link by threading the nut down onto the link end. Unscrew
threaded ring, let canopy and threaded ring slip down.
14) Pass electrical wire and ground wire through chain link[H], threaded ring[F],
canopy, screw collar loop, threaded pipe and into outlet box.
15) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a hole and two raised
dimples, wrap ground wire from outlet box around green ground screw,
and thread into hole.
b) On xtures where a cupped washer is provided, aach ground wire from
outlet box under cupped washer and green ground screw, then thread
into mounng strap.
If xture is provided with ground wire, connect xture ground wire to outlet
box ground wire with wire connector aer following the above steps. Never
connect ground wire to black or white power supply wires.
16) Make wire connecon. Reference chart below for correct connecons and
wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
17) Raise canopy to ceiling.
18) Secure canopy in place by ghtening threaded ring onto screw collar loop.
19) Install the recommended bulbs (not supplied).
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Fixture Diagram
Parts List
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main fusebox before
starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance with the Naonal Electrical
Code (NEC) and all local code specicaons. If you are not familiar with code
requirements, installaon by a cered electrician is recommended.
CLEANING:
• Always be certain that electric current is turned o before cleaning.
• Only a so damp cloth should be used. Harsh cleaning products may damage
the nish.
Installaon Instrucons
1) Aach center tube aached to upper frame[M] to lower frame[N] by
screwing end of short threaded tube[K] into coupling on top of main frame.
2) Aach arm on upper frame[M] to lower screen assembly[P] by inserng
threads on lower end of arm into inner hole on mounng bracket on lower
screen assembly[P] and out of outer hole on mounng bracket.
3) Secure arm to mounng bracket by screwing nial[O] onto threads on end of
arm protruding out of mounng bracket.
4) Repeat steps 2 and 3 for remaining two (2) arms.
5) Pass xture wire from the upper frame[M] through a stem[L] and short
threaded tube[K] and screw stem into coupling on top of upper frame.
NOTE: Thread locking compound must be applied to all stem threads as
noted with symbol (4) to prevent accidental rotaon of xture during
cleaning, relamping, etc.
6) Pass xture wire through desired amount of stems and screw stems together
using supplied short threaded tubes.
7) Pass xture wire from last stem through loop[I]. Thread loop onto end of last
stem.
Installaon Instrucons (connued)
[A] Threaded Pipe
[B] Screw Collar Loop
[C] Hexnut
[D] Mounting Strap
[E] Outlet Box
[F] Threaded Ring
[G] Canopy
[H] Locking Chain Link
[I] Loop
[J] Strap Mounting
Screws
[K] Threaded Tubes
[L] Stem
[M] Upper Frame
[N] Lower Frame
[O] Finial
[P] Lower Screen
Assembly
E
C
J
A
G
B
F
H
►
I
L
K
►
►
►
M
D
B
I
H
K
O
P
N
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3

Kichler Lighting 52079PAL User manual

52079PAL
Brand
Kichler Lighting
Model
52079PAL
Type
User manual

Kichler Lighting 52079PAL is a stylish and versatile light fixture that can be used to enhance the ambiance of any room. With its adjustable height and multiple arms, it provides ample lighting for a variety of tasks. The fixture is easy to install and comes with all the necessary hardware. It is also backed by a one-year warranty, so you can be sure that it will last for years to come. Whether you're looking to add a touch of elegance to your living room or create a more inviting atmosphere in your bedroom, the Kichler Lighting 52079PAL is a great choice.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents