Brodit 853138 Datasheet

Product 853138

853138 ProClip

Angled mount, High, ONLY for vehicles with cup holder

The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for

your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is

car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required

and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

EAN: 7320288531380

Item no 853138 fits:

Subaru Forester 03-07 (For Europe)

Subaru Forester 03-07 (For USA)

1(2)

1. 2.

INSTALLATION INSTRUCTIONS

4.3.

Attention! Read all instructions and look at the pictures before attaching the ProClip.

1. Press the thin end of the enclosed gap opener into the gap between the stereo and the surrounding panel

frame to widen the gap. Peel off the cover of the adhesive tape on the ProClip.

2. Press the lower part of the ProClip, with adhesive tape, into the gap next to the gap opener. Pull out the gap

opener.

3. Press the grooved edge on the upper part of the ProClip into the gap between the air vent panel frame and the

dashboard. Press firmly forward until you see or hear/feel it snaps into place.

4. The ProClip is in place.

2(2)

This manual is also suitable for

Download PDF