Brodit 855017 Datasheet

Hello! I am an AI chatbot trained to assist you with the Brodit 855017 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Product 855017

855017 ProClip

Angled mount

The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for

your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is

car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required

and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

EAN: 7320288550176

Item no 855017 fits:

Cadillac Escalade 15 (For USA)

1(2)

1. 2.

INSTALLATION INSTRUCTIONS

4.3.

Please read the instructions and look at the pictures before installing the ProClip.

1. Press the thin end of the enclosed gap opener into the gap between the padded part of the dashboard and the

wood grain panel, to widen the gap.

2. Press the grooved edge on the upper part of the ProClip into the gap next to the gap opener. Press until you

see or hear/feel it click into place.

3. Press the thin end of the other gap opener into the gap between the padded console sidewall and the center

panel frame, to widen the gap. Push firmly forward on the left side of the ProClip face plate with your thumb so

the grooved edge goes into the gap above the gap opener. Press until you see or hear/feel it click into place.

Remove both the gap openers.

4. The ProClip is in place.

2(2)