Siemens DTNF362 Specification

Brand: Siemens

Model: DTNF362

Type: Specification

Siemens DTNF362 is a heavy-duty double-throw safety switch designed for a wide range of electrical applications. With a maximum AC voltage of 600 volts and a current rating of 60 amps, this switch is suitable for use in both residential and commercial settings. The DTNF362 features a quick-make and break switching action, double break visible blade design, and highly visible ON/OFF indication for easy operation and safety.

Product Specification Sheet HD60.13

Answers for industry.

Heavy Duty Double Throw

Safety Switch

Type VBII, 60 Amp, Type 1 (Indoor)

Standards and Ratings

• UL Listed under file #E4776

• Meets UL98 for switches and UL 50

for enclosures

• Meets NEMA Standard KS-1 for

enclosed switches

• Meets NEC wire bending space

requirements

• Suitable for use as service

equipment

• Rated 10,000 AIC with Class H or

200,000 AIC when used with or

protected by Class R or J fuses (fuse

ampere rating must not exceed

switch ampere rating)

Features

• Quick-make and break switching

action

• Double break visible blade design

• Highly visible ON/OFF indication

• Modular design allows quick and

easy replacement of parts

• Front removable lugs which can

easily be converted to copper body

or compression type lugs

• Defeatable dual cover interlock

• All copper current carrying parts

• Tangential knockouts

• Handle is padlockable in OFF position

Catalog Number Description

Catalog Max Shipping

Number AC Volts Description Weight (lbs.)

DTF322

240 Fusible, 3 Pole, 3 Wire 43

DTF362

600 Fusible, 3 Pole, 3 Wire 43

DTNF222 240 Non-fusible, 2 Pole, 2 Wire 35

DTNF322 240 Non-fusible, 3 Pole, 3 Wire 36

DTNF362 600 Non-fusible, 3 Pole, 3 Wire 36

Catalog

240V 1Ø 240V 3Ø 480V 3Ø 600V 3Ø 250V DC

Number Std Max Std Max Std Max Std Max Std Max

DTF322 3 10 7¹⁄₂ 15 — — — — 10 —

DTF362 3 10 7¹⁄₂ 15 15 30 15 50 10 —

DTNF222 — 10 — 20 — — — — — 10

DTNF322 — 10 — 20 — — — — — 10

DTNF362 — 10 — 20 — 50 — 60 — 10

General Information

Horsepower Ratings

HA161234 Auxiliary Switch (1-NO & 1 NC)

HA261234 Auxiliary Switch (2-NO & 2 NC)

HA361234 Low Voltage Auxiliary Switch

HG61234 Equipment Ground Lug Kit (two lugs provided)

HG261234 Isolated Equipment Ground Lug Kit

HP62 Fuse Puller (3 per kit, (2) kits required per switch)

HN263 Neutral Kit

HR612 240 Volt Class R Fuse Clip Kit (3 fuse clips per kit,

(2) kits required per switch)

HR62 600 Volt Class R Fuse Clip Kit (3 fuse clips per kit,

(2) kits required per switch)

HLC612 Copper Lug Kit (9 lugs per kit)

HCL623 Compression Lug Neutral Barrier Kit

Fusible switches accept: Class H fuses as standard or Class R fuses with kit. Catalog number DTF362 also

accepts Class J fuses (move load base).

Dual horse ratings: Std - applies when non-time delay fuses are installed. Max - applies when time-delay

fuses are installed.

(2) required per switch (one for each of the two line bases).

Lugs are aluminum alloy as standard. Optional copper body lugs are available.

Accessories

Product Specification Sheet #HD60.13 (page 2 of 2)

Compression Lugs (UL listed for field installation)

Wire

Burndy Thomas-Betts IIsco

Size CU ONLY CU/AL CU ONLY CU/AL CU ONLY CU/AL

#14-10 256-30695-1352 60097

YA8C-L1 BOX YA8CA3 54130 60102 ACL-8

YA8C-TC14 54930BE 61102

YA6C-L BOX YA6CA1 54105 60107 CRB-6 ACL-6

YA6C 54905BE 61107 CRB-6L

#4 54106 61112 CRB-4

Catalog

Dimensions Wire Bending Space

Number A B C Top Bottom

DTNF222

DTNF322

24.87 19.00 25.51

DTNF362

(632) (483) (648)

4.90 4.90

DTF322

33.45 27.50 34.19

4.90

7.40

DTF362 (852) (699) (868) 4.90

Catalog number is same as switch catalog number plus “DOOR” suffix.

If compression lugs are used for the neutral, order compression lug neutral barrier

kit HCL612.

Dimensions and Wire Bending Space

Mechanical Lug Wire Ranges (60/75°C, Cu/Al)

Description Wire Range

Line, Load

#12-2 AWG

Neutral

Ground #14-4 AWG

Catalog

Number Description

HFB22 Fusible 240 Volt Line Side Replacement Base (2) kits required

per switch

HBB22 Fusible 240 Volt Load Side Replacement Base (2) kits required

per switch

HFB62 Fusible 600 Volt Line Side Replacement Base (2) kits required

per switch

HBB62 Fusible 600 Volt Load Side Replacement Base (2) kits

required per switch

HNB623 Non-fusible Replacement Line Base (2) kits required per switch

HHD61234 Replacement Handle/Handle Guard

HL612 Replacement Lugs (3 lugs per kit)

HM6123 Replacement Mechanism (2) kits required per switch

Replacement Door

Replacement Parts

Dimensions shown in inches and millimeters ( ).

Dimension shown accurate to

¹⁄₈ inch.

Enclosure: Cold Rolled Steel .053 Thick (17 Gauge)

Finish – ANSI Grey #61 Paint

Dimension Drawing

2.81

(71)

9.38 (238)

4.69

(119)

(6) .268"

(6.8) diameter

mounting holes

(4) knockouts in

back and (2) in

each side for 3/4, 1,

1 1/4 & 1 1/2" conduit

2.00 (51)

5.73

(146)

2.45

(62)

6.09

(155)

.25(6)

2.42

(61)

16.44

(418)

Note: This

KO only

omitted on

Non-Fusible

Switches

(OD Box

Less Cover)

1.62

(41)

2.06

(52)

2.00 (51)

This mounting

hole omitted

on DTNF222,

DTNF322 &

DTNF362

.94

(24)

2.37

(60)

13.50

(343)

2.50

(64)

2.50

(64)

(2) knockouts

for 1/2"

conduit

(2) 1/2"

knockouts

3.82

(97)

.94

(24)

1.25

(32)

1.25

(32)

11.50

(292)

1.69 (43)

(4) knockouts

for 3/4, 1,

1 1/4, 1 1/2"

conduit

Note: Typical of both

top and bottom ends

Siemens is a registered trademark of Siemens AG. Product names

mentioned may be trademarks or registered trademarks of their

respective copanies. Specifications subject to change without notice.

www.usa.siemens.com/switches

Siemens Industry, Inc.

Building Technologies Division

5400 Triangle Parkway

Norcross, GA 30092

1-800-964-4114

Subject to change without prior notice

Printed in USA

Siemens DTNF362 Specification

Siemens DTNF362 Specification

Siemens DTNF362 Specification

Related papers

Other documents