Siemens HNF362H Specification

Type
Specification
Product Specification Sheet HD60.6
Answers for industry.
Heavy Duty Safety Switch
Type VBII, 60 Amp, Type 1 (Indoor)
Standards and Ratings
UL Listed under file #E4776
Meets UL98 for switches and UL 50
for enclosures
Meets NEMA Standard KS-1 for
enclosed switches
Meets NEC wire bending space
requirements
Rated 10,000 AIC as standard or
100,000 when protected by Class R,
T or J fuses rated 60 amp maximum
•I
2
t rated (Amps
2
x Seconds =
200,000)
Suitable for use as service
entrance equipment
Features
Quick-make and break switching
action
Double break visible blade design
Highly visible ON/OFF indication
Rugged installer friendly enclosure
design
Modular design allows quick and
easy replacement of parts
Front removable lugs which can
easily be converted to copper body
or compression type lugs
Defeatable dual cover interlock
Accessories
1
Also rated 20HP on 3 Phase, 240V AC systems.
2
Place “DOOR” at the end of the switch catalog
number.
Catalog Number Description
HNB612 Non-Fusible Replacement Base
HH6123 Replacement Handle/Handle Guard
HL612 Replacement Lugs (3 lugs per kit)
HM6123 Replacement Mechanism
2
Replacement Door
Mechanical Lug Wire Ranges (60/75°C, Cu/Al)
Description Wire Range
Line #12-3 AWG (Al) or
#14-3 AWG (Cu)
Load, #12-2 (Al)
Neutral #14-2 (Cu)
Ground #14-4 AWG
Replacement Parts
Catalog Number Description
HA161234 One Normally Open and Closed Auxiliary Switches
HA261234 Two Normally Open and Closed Auxiliary Switches
HA361234 Low Voltage Auxiliary Switch
HG61234 Equipment Ground Lug Kit
HG261234 Isolated Equipment Ground Lug Kit
HN612 Neutral Kit
HLC612 Copper Lug Kit (9 lugs per kit)
HCL612 Compression Lug Neutral Barrier Kit
Horsepower Ratings - 600 Volts
Catalog
3 Phase, 480V AC 3 Phase, 600V AC
250V
Number Std Max Std Max DC
HNF362H 50
1
— 40 10
General Information
Catalog Max. Shipping
Number Volts Description Weight (lbs.)
HNF362H 600V AC, 250V DC 3 Pole, 3 Wire, Non-Fusible 12
Product Specification Sheet #HD60.6 (page 2 of 2)
Dimension Drawing
Compression Lugs
1
Wire
Burndy Thomas-Betts Ilsco
Size CU Only CU/AL CU Only CU/AL CU Only CU/AL
60096
#14-10
60097
YA8C-L BOX 54104 60101 CRA-8 ACL-8
#8 YA8C-L1 BOX 54130 60102 ACN-8
61102
#6 61107
KNOCKOUT
CODE
CONDUIT
SIZE
A
.75 , 1
[19] [25]
B
.5 ,.75 , 1
[13] [19] [25]
30A HD NF TY1 ENCLOSURE
NOTES:
MATERIAL: COLD ROLLED STEEL,.054 THICK (17 GAUGE)
FINISH: ANSI GRAY #61 PAINT
60AGD NF TY1
1.71
43[]
DIA.27
7[]
.92
23[]
8.35
212[]
9.01
229[]
5.71
145[]
.91
23[]
6.64
169[]
1.51
38[]
1.80
46[]
1.80
46[]
.25
6[]
.95
24[]
1.50
38[]
1.50
38[]
.75
19[]
.65
16[]
.28
7[]
.25 DIA GROUND KNOCKOUT
TOP & BOTTOM
B
(3)
DETAIL C
.91
23[]
1.46
37[]
1.47
37[]
9.12
232[]
.68
17
[]
A
(4)
B
LEFT SIDE
6.52
166[]
1.35
34[]
DIA.27
7[]
.32
8[]
12.31
313[]
7.67
195[]
4.34
11 0[]
1.04
26[]
.94
24[]
SEE DETAIL C
OF BOX
.91
23[]
[]
[]
11.11
282[]
1.45
37[]
B
LEFT &
RIGHT SIDE
10.17
258[]
5.05
128
8.25
210
TOP & BOTTOM
Dimensions shown in inches and millimeters ( ).
Dimension shown accurate to
+
¹⁄₈ inch.
1
If compression lugs are used for the neutral, order compression lug neutral barrier kit HCL612.
Enclosure: Cold Rolled Steel
.054 Thick (17 Gauge)
Finish: ANSI Grey #61 Paint
KNOCKOUT CONDUIT
CODE SIZE
A (Concentric)
.75 1.00
B (Tangential) .50 .75 1.00
LINE SIDE LOAD SIDE
WIRE BEND WIRE BEND
Non-Fused 3.02 (77) 4.11 (104)
Siemens is a registered trademark of Siemens AG. Product names
mentioned may be trademarks or registered trademarks of their
respective copanies. Specifications subject to change without notice.
www.usa.siemens.com/switches
Siemens Industry, Inc.
Building Technologies Division
5400 Triangle Parkway
Norcross, GA 30092
1-800-964-4114
Subject to change without prior notice
All rights reserved
Printed in USA
© 2009 Siemens Industry, Inc.
  • Page 1 1
  • Page 2 2

Siemens HNF362H Specification

Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI