Siemens DTF322R Specification

Type
Specification
Product Specification Sheet HD60.14
Answers for industry.
Heavy Duty Double Throw
Safety Switch
Type VBII, 60 Amp, Type 3R (Outdoor) Enclosure
Standards and Ratings
• UL Listed under file #E4776
• Meets UL98 for switches and UL50
for enclosures
• Suitable for use as Transfer
Equipment on optional standby
systems as defined by Article 702
of the NEC
• Meets NEMA Standard KS-1 for
enclosed switches (Type HD)
• Meets NEC wire bending space
requirements
Suitable for use as service equipment
Rated 10,000 AIC with Class H or
200,000 AIC when used with or
protected by Class R or J fuses (fuse
ampere rating must not exceed
switch ampere rating)
Features
• Quick-make and break
switching action
Visible blade, double break
construction
• Highly visible ON/OFF indication
Modular design allows quick and
easy replacement of parts
• Front removable lugs which can
easily be converted to copper body
or compression type lugs
Defeatable dual cover interlock
All copper current carrying parts
4
Tangential knockouts
Handle is padlockable in OFF position
Accessories
1
DTF322R accepts Class H fuses as standard and Class R fuses with kit.
2
Dual horse ratings: Std - applies when non-time delay fuses are installed.
Max - applies when time-delay fuses are installed.
3
(2) required per switch (one for each of the two line bases).
4
Lugs are aluminum alloy as standard. Optional copper body lugs are available.
Catalog Number Description
Catalog
240V 1Ø 240V 3Ø 480V 3Ø 600V 3Ø 250V DC
Number Std Max Std Max Std Max Std Max Std Max
DTF322R 3 10 7¹⁄₂ 15 — 10
DTNF362R — 10 20 50 60 10
Horsepower Ratings
2
HA161234 Auxiliary Switch (1-NO & 1 NC)
3
HA261234 Auxiliary Switch (2-NO & 2 NC)
3
HA361234 Low Voltage Auxiliary Switch
3
HG61234 Equipment Ground Lug Kit (two lugs provided)
HG261234 Isolated Equipment Ground Lug Kit
HP62 Fuse Puller (3 per kit, (2) kits required per switch)
HN263 Neutral Kit
HR612 240 Volt Class R Fuse Clip Kit (3 fuse clips per kit,
3
(2) kits required per switch)
HLC612 Copper Lug Kit (9 lugs per kit)
3
HCL623 Compression Lug Neutral Barrier Kit
HS075 0.75” Type “HS” Outdoor Hub
HS100 1.00” Type “HS” Outdoor Hub
Catalog Max Shipping
Number AC Volts Description Weight (lbs.)
DTF322R
1
240 Fusible, 3 Pole, 3 Wire 44
DTNF362R 600 Non-fusible, 3 Pole, 3 Wire 37
General Information
Product Specification Sheet #HD60.14 (page 2 of 2)
1
Catalog number is same as switch catalog number plus “DOOR” suffix.
2
If compression lugs are used for the neutral, order compression lug neutral barrier kit HCL612.
Mechanical Lug Wire Ranges (60/75°C, Cu/Al)
Description Wire Range
Line, Load
#12-2 AWG (Al)
Neutral
Ground #14-4 AWG
Catalog
Number Description
HFB22 Fusible 240 Volt Line Side Replacement Base (2) kits required
per switch
HBB22 Fusible 240 Volt Load Side Replacement Base (2) kits required
per switch
HNB623 Non-fusible Replacement Line Base (2) kits required per
switch
HHD61234 Replacement Handle/Handle Guard
HL612 Replacement Lugs (3 lugs per kit)
HM6123 Replacement Mechanism (2) kits required per switch
1
Replacement Door
Replacement Parts
Compression Lugs (UL listed for field installation)
2
Wire
Burndy Thomas-Betts IIsco
Size CU Only CU/AL CU Only CU/AL CU Only CU/AL
#14-10 256-30695-1352 60097
YA8C-L1BOX YA8CA3 54130 60102 ACL-8
#8
YA8C-TC14 54930BE 61102
#6
YA6C-L BOX YA6CA1 54105 60107 CRB-6 ACL-6
YA6C 54905BE 61107 CRB-6L
#4 54106 61112 CRB-4
Dimensions shown in inches and millimeters ( ).
Dimension shown accurate to
+
¹⁄₈ inch.
Enclosure: Galvanized Steel .053 Thick (17 Gauge)
Finish – ANSI Grey #61 Paint
Catalog
Dimensions Wire Bending Space
Number A B C Top Bottom
DTNF362R
24.87 19.00 25.51
(632) (483) (648)
4.90 4.90
DTF322R
33.55 27.50 34.19
4.90 7.40
(852) (699) (868)
Dimension Drawing
This mounting
hole omitted
on DTNF362R
B
2.81
(71)
9.38 (238)
4.69
(119)
C
L
(6) .268" (6.8)
diameter
mounting
holes
(2) knockouts
in back (1) in
each side for
3/4, 1, 1 1/4,
1 1/2" conduit
2.00
(51)
2.00
(51)
.55 (14)
6.54
(166)
5.73
(146)
C
2.45
(62)
6.09
(155)
.94 (24)
.25(6)
2.42
(61)
16.44
(418)
Note: This
KO only
omitted on
Non-Fusible
Switches
.80 (20)
A
(OD Box
Less Cover)
1.62
(41)
13.62
(346)
C
L
2.50
(64)
2.50
(64)
(2) knockouts
for 1/2" conduit
(2) 1/2" knockouts
3.82
(97)
.94
(24)
1.25
(32)
1.25
(32)
11.50
(292)
1.69 (43)
(4) knockouts for
3/4, 1, 1 1/4,
1 1/2" conduit
C
L
2.09 (53)
Provision for HS
Type 3R Hub
Dimensions and Wire Bending Space
Siemens is a registered trademark of Siemens AG. Product names
mentioned may be trademarks or registered trademarks of their
respective copanies. Specifications subject to change without notice.
www.usa.siemens.com/switches
Siemens Industry, Inc.
Building Technologies Division
5400 Triangle Parkway
Norcross, GA 30092
1-800-964-4114
Subject to change without prior notice
All rights reserved
Printed in USA
© 2009 Siemens Industry, Inc.
  • Page 1 1
  • Page 2 2

Siemens DTF322R Specification

Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI